LS1 Motor plate
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
LS1 Motor plate
Anyone got a file for LS1 motor plate? Don't want to spend the time if someone already gots one.. Thanks
Picture of what I am looking for.. Thanks
Picture of what I am looking for.. Thanks
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 66
- Joined: Sat Dec 26, 2015 12:14 pm
Re: LS1 Motor plate
I've been meaning to draw one forever. I've got a rear plate on my laptop.
-
- 2.5 Star Elite Contributing Member
- Posts: 183
- Joined: Mon Jun 06, 2011 11:14 am
- Location: Kelso
Re: LS1 Motor plate
there use to be one on fabricators file exchange, but the site has been down for some time, maybe someone grabbed it. thanks KH
5x10 Flow Waterjet
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
Re: LS1 Motor plate
Binderman a Rear would be sweet also..I cant find a damn front one to save my life...
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
Re: LS1 Motor plate
Here is a Header flange for LS1
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 11
- Joined: Sat Mar 26, 2016 11:18 pm
- Location: South Dakota
- Contact:
Re: LS1 Motor plate
Huge Thank you to whoever can come up with a front or rear plate and post it. Thanks!
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: LS1 Motor plate
This guy drew up a plate for his Mustang conversion:
http://forums.corral.net/forums/mixed-p ... xbody.html
Maybe get with him, and see if he still has it?
http://forums.corral.net/forums/mixed-p ... xbody.html
Maybe get with him, and see if he still has it?
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
Re: LS1 Motor plate
Anyone find anything ?
-
- 1 Star Member
- Posts: 22
- Joined: Thu Feb 17, 2011 1:57 am
Re: LS1 Motor plate
here you go try these
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
Re: LS1 Motor plate
Thanks a ton
-
- 1.5 Star Member
- Posts: 46
- Joined: Tue Apr 28, 2015 8:32 am
Re: LS1 Motor plate
Thanks for sharing. I might need this some day.
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: LS1 Motor plate
Thanks for sharing
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: LS1 Motor plate
Thanks for the share courtesy enterprises. May I ask what the difference is between the two rear plates. It appears the top section is a little thicker on the middle one. Haven't open file, just wondering. Also what the smaller pieces for a trans mount maybe?
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Apr 28, 2017 3:05 pm
Re: LS1 Motor plate
Thanks for sharing this file. Does anyone happen to have this exact one?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 52
- Joined: Thu Apr 07, 2016 6:16 pm
Re: LS1 Motor plate
anyone have a intake valley plate for ls1
-
- 3 Star Elite Contributing Member
- Posts: 319
- Joined: Thu Mar 31, 2016 2:51 pm
Re: LS1 Motor plate
Thanks for sharing