Lantern Shadow Light
-
- 3.5 Star Elite Contributing Member
- Posts: 365
- Joined: Sun Dec 13, 2009 8:59 pm
- Location: Tacoma, Wa.
Lantern Shadow Light
Michmetalman posted a file of an old lantern under a previous post titled "Old Lantern Needed" (Thanks Mich!). It had the potential to make a nice candle shadow light. So here is what I came up with. This is quick and dirty but I am sure some of you metal geniuses can take it and run with it. You can use a votive candle and glass or a small glass chimney. Both will fit in the same ring. Sorry it was not dark enough for a better lighted picture but you get the idea....................RK
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- 1MORECUT
- 2.5 Star Elite Contributing Member
- Posts: 168
- Joined: Wed Mar 31, 2010 6:58 pm
Re: Lantern Shadow Light
Nice Job. Thanks for the file.
John
John
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
Re: Lantern Shadow Light
very nice Thanks
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Lantern Shadow Light
Nice! I use mine pretty much the same way by putting a votive holder behind it.
-
- 3 Star Member
- Posts: 490
- Joined: Fri Feb 10, 2012 5:13 pm
- Location: Cheyenne, WY
Re: Lantern Shadow Light
Awesome!
-
- 2 Star Elite Contributing Member
- Posts: 61
- Joined: Fri Oct 21, 2011 10:37 pm
Re: Lantern Shadow Light
Great idea thanks
-
- 1.5 Star Member
- Posts: 42
- Joined: Mon Jul 13, 2015 6:55 pm
Re: Lantern Shadow Light
very cool
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Lantern Shadow Light
I am really liken this item. thanks for sharing.
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 2.5 Star Member
- Posts: 109
- Joined: Thu Jan 29, 2015 12:52 pm
Re: Lantern Shadow Light
Gorgeous work!!!!
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Lantern Shadow Light
LIKE IT! Thank you.
-
- 2 Star Member
- Posts: 53
- Joined: Wed Apr 08, 2015 4:21 pm
Re: Lantern Shadow Light
Thank you for the share!
-
- 3 Star Elite Contributing Member
- Posts: 354
- Joined: Sun Jan 22, 2012 5:39 pm
Re: Lantern Shadow Light
Nice. Thanks for sharing. Can't wait to cut one. Will prolly use copper vein powder coat
One question, what did you use for the ring that the candle sits in?
One question, what did you use for the ring that the candle sits in?
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
-
- 3.5 Star Elite Contributing Member
- Posts: 365
- Joined: Sun Dec 13, 2009 8:59 pm
- Location: Tacoma, Wa.
Re: Lantern Shadow Light
Hi K D. I used a ring roller and 11G X 1/2" strap metal to make the ring. You can also just use bend tabs to center the candle holder as in the revised attached. If you are wary of a candle flame, you can use a puck light similar to the one at http://www.harborfreight.com/catalogsea ... uck+lights. Lowes or Home Depot has them also. The copper vein coating would be a great color!.......RK
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Nacs Fab
- 3 Star Member
- Posts: 329
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Lantern Shadow Light
That is cool, thanks for the share!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 2 Star Elite Contributing Member
- Posts: 86
- Joined: Wed Jul 13, 2011 6:15 pm
Re: Lantern Shadow Light
Very nice!!Thanks for sharing!!
-
- 2.5 Star Elite Contributing Member
- Posts: 175
- Joined: Thu Jun 27, 2013 6:37 am
Re: Lantern Shadow Light
Great idea
-
- 2 Star Member
- Posts: 98
- Joined: Mon Apr 20, 2015 6:38 am
Re: Lantern Shadow Light
Thanks for sharing