Garden Stakes

storiesnsteel · Post by **storiesnsteel** » Thu Mar 31, 2016 10:38 am

I downloaded some garden stakes from here a while ago but put them in an oval instead of square so you just take a piece of 3/16 round about 12 inches long works well

all garden stakes.cdr

tried 3 times to load the dxf maybe someone could help with that.

MetalTorcher · Post by **MetalTorcher** » Thu Mar 31, 2016 10:46 am

Here is your file in dxf. The font may be a little too skinny for most plasma but that is easily changeable.

storiesnsteel · Post by **storiesnsteel** » Thu Mar 31, 2016 10:50 am

thanks for doing that and I agree when you first see it the font looks funny but it is meant to burn out I have burnt all of these files and they burn well happy gardening and have a great day.

storiesnsteel · Post by **storiesnsteel** » Thu Mar 31, 2016 10:53 am

oh ps the size should be 3.3 x 7 inches for each oval

storiesnsteel · Post by **storiesnsteel** » Thu Mar 31, 2016 8:10 pm

Im not sure about others on here but I do get tired of posting files and the vultures swoop in and grab the files without so much as a thanks. Its not about an ego thing its about a wee bit of appreciation for a shared file. I don't post near the files that I used to on here just because of that. I see some awesome files that members obviously spent a lot of time on and are good enough to share and never a thanks. Sad really

Largemouthlou · Post by **Largemouthlou** » Thu Mar 31, 2016 9:04 pm

You are correct!! 37 down loads and not a thank you one for your time!!!!!!!!! I will be the second after Jason!! Thanks for the share of your time and the file to ya both!!

Old Iron · Post by **Old Iron** » Thu Mar 31, 2016 11:35 pm

I've noticed the same thing and think it's extremely rude.
Thanks for taking the time to share with us!!!!!!!!!!!!

Brew Worx · Post by **Brew Worx** » Fri Apr 01, 2016 5:26 am

Thanks for the share GCW8.

The wife and I have made a few of these also. You nailed the idea we were going for. Love the font. Its actually the charactor we were looking for.

exapprentice · Post by **exapprentice** » Fri Apr 01, 2016 7:04 am

Sad thing is people dont even try the search function for themselves

not hard to do : http://www.plasmaspider.com/viewtopic.php?f=6&t=6352

looks like this project started some 4 years ago from this post in 2012

Capstone · Post by **Capstone** » Fri Apr 01, 2016 10:31 am

I'm convinced that there are at least 20 "bots" that people have running that just download anything with a .dxf and then they sort through them once a week for the ones they want to cut and sell without one smidgen of appreciation. It's the old 80/20 rule for people in any group/clan/club; proven time and time again. Those are the same Oblivians and Sheeple that will screw up any of the generosity and good in people.

Post by **someguy** » Fri Apr 01, 2016 2:03 pm

nice design, thanks for the post.
Great gift for my green thumb neighbor.

Post by **tjenus** » Fri Apr 01, 2016 2:17 pm

Nice thanks

gsi · Post by **gsi** » Fri Apr 01, 2016 6:17 pm

Thanks for sharing. I'll be cutting some of these out for my mother's garden.

storiesnsteel · Post by **storiesnsteel** » Fri Apr 01, 2016 7:25 pm

I did download the garden stakes from here a while ago but pulled out the file and put my own touch to it and reposted them as revised by me. I have posted lots of things on the forum that people have altered and reposted. I look forward to seeing parts of my work show up from time to time incorporated into something even better and that is what I feel thus forum is at least in part is all about. Thanks to all that responded to my post and it is encouraging to see that others have the same thoughts. Thanks so much and have a great weekend folks.

radicalrescue · Post by **radicalrescue** » Fri Apr 01, 2016 10:59 pm

thanks i had some font that looked like that once an i mess up an deleted it so how trying to put them all in one folder ...opps well thanks nice job

Post by **shinertx** » Sat Apr 02, 2016 1:38 pm

thanks for the file I will shoot some picture with the signs with my wife above ground garden. Robert

storiesnsteel · Post by **storiesnsteel** » Sat Apr 02, 2016 8:00 pm

one more correction I made the slots a smidge big so 1/4 round rod will work the best for the stakes

Brew Worx · Post by **Brew Worx** » Sun Apr 03, 2016 8:37 am

We have been finding that customers contact us asking for simiar idea based off a google search. Then of course they ask for it to be customized. At the same or lower price if course.

Great up load nf thanks for sharing.

storiesnsteel · Post by **storiesnsteel** » Sun Apr 03, 2016 8:54 pm

I get a lot of the same thing they will pick one of my files then want their name or something custom for the same price. I always say art work starts at 30 dollars and goes from there.

Post by **TimP** » Mon Apr 04, 2016 8:39 am

Thank you very much for taking the time to make and share these!
TIm

Kenny Burleson · Post by **Kenny Burleson** » Mon Apr 04, 2016 10:36 am

Thank you ,my wife will love these for her garden. I appreciate everyone that shares on here. I am still learning to draw and I do not have a problem paying Plasmas Spiders annual fee until I can do my own drawings.i will be glad when i can share my own on here!

Post by **mmentel5** » Mon Apr 04, 2016 2:32 pm

thank you !!

Post by **tam325** » Wed Apr 06, 2016 9:53 am

Those are great, thanks!

Post by **edclayton1** » Sat Apr 09, 2016 10:57 pm

Thanks man. Very cool.

Dcon · Post by **Dcon** » Sun Apr 10, 2016 1:01 am

Thanks!

Garden Stakes

Garden Stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes

Re: garden stakes