Trick or Treat stuff
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Trick or Treat stuff
Totally off season, but for some, now's the time to make a to do list for Halloween. If this is somehow a repeat post, apologies.
It's a mashup of a door hanger or table display along with some pumpkin spears. I just tack some scrap strips of 16ga for the spikes. The spikes were coloring book freeware images I grabbed and cleaned up for cutting
It's a mashup of a door hanger or table display along with some pumpkin spears. I just tack some scrap strips of 16ga for the spikes. The spikes were coloring book freeware images I grabbed and cleaned up for cutting
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 2 Star Elite Contributing Member
- Posts: 61
- Joined: Fri Oct 21, 2011 10:37 pm
Re: Trick or Treat stuff
Cool stuff! Any chance you can post it as a DXF?
-
- 2.5 Star Member
- Posts: 133
- Joined: Tue Dec 08, 2015 1:06 am
- Location: St. George, Utah
Re: Trick or Treat stuff
As a DXF.
5x10 ArcLight Dynamics Plasma table
http://www.thesteelyardinc.net
http://www.thesteelyardinc.net
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Trick or Treat stuff
sorry guys... I only work with .svg files in SheetCAM and when it comes to artsy stuff, I have yet to find a cleaner file type than .svg (scalable vector graphics) when it's time to create my cut paths for g-code in SheetCAM. The node count drops exponentially and speeds up import conversion by SheetCAM sometimes in minutes, not seconds. I simply don't go near .dxf anymore if I can help it. I know others use both and most uploads here are .dxf, but I invite you to try skipping .dxf files when using Inkscape and SheetCAM, it's so much faster and cleaner, it's like night and day.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 2.5 Star Member
- Posts: 133
- Joined: Tue Dec 08, 2015 1:06 am
- Location: St. George, Utah
Re: Trick or Treat stuff
....and I have to apologize - I converted it, but it was too big to attach, apparently. 1.2m, 0.2 too big.
I am too new to this to figure out how to make the dxf smaller - I just use what I make.
I am too new to this to figure out how to make the dxf smaller - I just use what I make.
5x10 ArcLight Dynamics Plasma table
http://www.thesteelyardinc.net
http://www.thesteelyardinc.net
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Trick or Treat stuff
Just need to put it in a .zip file which will compress it.I am too new to this to figure out how to make the dxf smaller - I just use what I make.
Good thing Inkscape is free, I use it just to convert .svg to dxf as I work in Autocad and svg is not recognized.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Tecki
- 1/2 Star Member
- Posts: 3
- Joined: Thu Mar 03, 2016 4:04 pm
- Location: Germany
Re: Trick or Treat stuff
Realy nice, exactely what I need!
Thanks a lot.
did u draw it by your own?
grez from Germany
Thanks a lot.
did u draw it by your own?
grez from Germany
Kind regards from Germany
1,5x3m KNUTH Plasma Table
Selfmade Control Unit, Proma THC
Hypertherm 1000
SolidWorks,Illustrator, SheetCAM, Mach3
1,5x3m KNUTH Plasma Table
Selfmade Control Unit, Proma THC
Hypertherm 1000
SolidWorks,Illustrator, SheetCAM, Mach3
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Trick or Treat stuff
Thanks Grez
The Door hanger is my creation from about 5 different images plus the lettering. The rest were pulled from kids online coloring book pages and revised for size and clean cuts. The pumpkin spears were nice give-aways last year for me since I didn't have enough stuff to buy a booth at any craft shows. I'm guessing they would do really well at Fall Craft shows.
The Door hanger is my creation from about 5 different images plus the lettering. The rest were pulled from kids online coloring book pages and revised for size and clean cuts. The pumpkin spears were nice give-aways last year for me since I didn't have enough stuff to buy a booth at any craft shows. I'm guessing they would do really well at Fall Craft shows.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 2.5 Star Member
- Posts: 179
- Joined: Sat Oct 23, 2010 5:22 pm
Re: Trick or Treat stuff
I JUST DELETED SOME OF THE COPIES
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 205
- Joined: Sun Apr 20, 2014 9:38 am
Re: Trick or Treat stuff
nice
Dynatorch 4x4 SuperBee, Powermax 65, Quincy QT-54, Snap On MM250SL, Thermal Arc Arcmaster 185, Corel Draw X7 and a messy garage.
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Trick or Treat stuff
Capstone wrote:sorry guys... I only work with .svg files in SheetCAM and when it comes to artsy stuff, I have yet to find a cleaner file type than .svg (scalable vector graphics) when it's time to create my cut paths for g-code in SheetCAM. The node count drops exponentially and speeds up import conversion by SheetCAM sometimes in minutes, not seconds. I simply don't go near .dxf anymore if I can help it. I know others use both and most uploads here are .dxf, but I invite you to try skipping .dxf files when using Inkscape and SheetCAM, it's so much faster and cleaner, it's like night and day.
Capstone,
I couldn't agree with you any more .dxf is a pain in the ass with all the zillion nodes and lines, .svg is the way to go, I use Corel Draw 7 and always .svg
Ron
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
-
- 4 Star Elite Contributing Member
- Posts: 798
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Trick or Treat stuff
We don't have any problems with DXF files in our Plasmacam program. We sure did when we had a Torchmate though.
Allen
Allen
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: Trick or Treat stuff
thanks for sharing
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: Trick or Treat stuff
Thanks for the share
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65