2 Clocks

Countrylane · Post by **Countrylane** » Mon Feb 15, 2016 8:19 pm

I posted these 2 clocks in the picture gallery and thought I would share the dxf of each of them since a few have requested. They are on this site somewhere but are hard to find.

24inch clock.DXF

Roman numbrs clock.DXF

larrycameron44 · Post by **larrycameron44** » Tue Feb 16, 2016 3:03 am

Thank you VERY MUCH.

. Can I ask where you buy the clock hands?

Larry
NZ

Countrylane · Post by **Countrylane** » Tue Feb 16, 2016 9:40 am

I ordered the hands and the high torque movements from clockworks. They are in Maine. The only place I could find gold 10 inch hands. If you order you will need to peel a thin layer of plastic off the hands before installing them. (I didnt know that at first and thot they were all scratched up ) Good luck !

Post by **sbest1** » Tue Feb 16, 2016 10:02 am

Beautiful. Thanks for sharing

Post by **mmentel5** » Tue Feb 16, 2016 10:46 am

very nice thank you

Post by **Bobcat320** » Tue Feb 16, 2016 7:28 pm

Thank you!

Post by **grindergary** » Tue Feb 16, 2016 9:22 pm

Awesome work,

thank you for the share.

Gary

stevewrobins · Post by **stevewrobins** » Thu Feb 18, 2016 4:53 am

Awesome, thanks for sharing

Post by **Mtw fdu** » Thu Feb 18, 2016 5:38 am

Thank you for the file.

Mtw fdu.

motoguy · Post by **motoguy** » Thu Sep 08, 2016 1:35 am

Countrylane wrote:I ordered the hands and the high torque movements from clockworks. They are in Maine. The only place I could find gold 10 inch hands. If you order you will need to peel a thin layer of plastic off the hands before installing them. (I didnt know that at first and thot they were all scratched up ) Good luck !

Do you have contact details for this vendor? I have a customer wanting a 3-4' diameter clock, so I would also like a high-torque movement. I google'd "clockworks maine"...and found about a hundred different clock shops. ha!

John Frantum · Post by **John Frantum** » Thu Sep 08, 2016 6:42 am

Nice!
Thanks for sharing.

claddagh · Post by **claddagh** » Thu Sep 08, 2016 9:10 am

Thank you nice file. You also can get clock hands & movements from:
Klokit.com & Primexusa.com!

claddagh · Post by **claddagh** » Thu Sep 08, 2016 9:12 am

Correction Klockit.com

Old Iron · Post by **Old Iron** » Fri Sep 09, 2016 8:57 am

Thanks for sharing!!!!!!!!!!!!!!!!!!

Post by **pdhoove** » Sun Sep 11, 2016 7:15 pm

Nice clock!

Capstone · Post by **Capstone** » Mon Sep 12, 2016 8:55 am

very nice... thanks for sharing. someday I'll get around to cutting all these cool designs others are posting.

Post by **shinertx** » Mon Sep 12, 2016 10:18 am

Thanks for the great file they will come in handy. Robert

Countrylane · Post by **Countrylane** » Mon Sep 12, 2016 6:31 pm

Here's the address for Clockworks
Box 339
124 Goss Hill
Huntington MA 01050 USA
phone 800 -381 -7458
clockworks@clockworks.com

Hope this helps you motoguy

tinshedfab · Post by **tinshedfab** » Wed Sep 14, 2016 11:32 am

Thank you!

kazlx · Post by **kazlx** » Wed Oct 12, 2016 1:10 am

Figured I'd add to this one:

Clock.dxf

Post by **david jordan** » Wed Oct 12, 2016 7:41 am

Thank You.

Post by **shinertx** » Wed Oct 12, 2016 8:25 am

Thanks for the share.

Countrylane · Post by **Countrylane** » Wed Oct 12, 2016 2:44 pm

Thanks kazix for the clock dxf. I really like that one

Post by **pdhoove** » Wed Oct 12, 2016 10:15 pm

Nice file! Thanks for sharing!

Countrylane · Post by **Countrylane** » Wed Oct 12, 2016 11:23 pm

Is anyone else having trouble downloading the dxf from kazix? There's nothing there when I try and open it. Please repost because it's so nice! Thanks

2 Clocks

2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks

Re: 2 Clocks