fire ball
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
fire ball
seem the fire ball was deleted so I putting mine back up all the art in the hexagons and pentagons came off this site . At this size it makes a 29" wide pit
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 62
- Joined: Sat Sep 13, 2014 1:32 pm
- Location: Eastern Washington
Re: fire ball
Thank You for the file
-
- 4 Star Member
- Posts: 1009
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: fire ball
thank you.For sharing
Jim
Jim
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: fire ball
Nice job
Thanks for sharing the file
Thanks for sharing the file
-
- 1 Star Member
- Posts: 17
- Joined: Wed Apr 08, 2015 12:00 pm
Re: fire ball
I do not see the file posted, can some one please share it
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Jan 20, 2010 6:55 pm
- Location: Canada
Re: fire ball
I cannot see it either and would sure like it too. Thanks
-
- 4 Star Elite Contributing Member
- Posts: 993
- Joined: Thu Nov 21, 2013 5:32 pm
Re: fire ball
i think the soccerball on here will make this....i posted one awhile ago..just insert your own art into each piece
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Sep 18, 2015 8:47 am
Re: fire ball
were is the file
-
- 1.5 Star Member
- Posts: 35
- Joined: Mon Dec 07, 2015 9:15 am
- Location: Montana
- Contact:
Re: fire ball
can you tell me the hexagon dimensions and how many you need to build it
-
- 2 Star Member
- Posts: 57
- Joined: Mon Nov 02, 2015 1:41 pm
- Location: Muskegon MI
Re: fire ball
I cut one this morning, 36 pcs total. I scaled mine down to a ball dia of 18" widest part was around 7".
Cincinnati CL-940 4000 watt Fiberoptic Laser 5' x 10' Dual Pallet
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: fire ball
Nice pit..but do not see the file either..and that metal is so clean would almost hate to see a fire in it
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: fire ball
I have noticed that before when I have loaded files only to check later to find that the file is not there soooooooo whats up with that?
Greg From Storiesnsteel
-
- 2 Star Member
- Posts: 57
- Joined: Mon Nov 02, 2015 1:41 pm
- Location: Muskegon MI
Re: fire ball
Dont know how long it will stay up here but here is my version, makes a 32" dia ball that stands 36" tall
Cincinnati CL-940 4000 watt Fiberoptic Laser 5' x 10' Dual Pallet
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: fire ball
nice!!! Thanks for the share
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: fire ball
Hi jfelker81
Thank you for your version of the file, looking forward to cutting it ready for the summer
Thank you for your version of the file, looking forward to cutting it ready for the summer
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
-
- 1.5 Star Member
- Posts: 46
- Joined: Mon Jan 20, 2014 12:58 pm
Re: fire ball
Thanks for the file going to make one for the school auction.
Andy
Andy
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: fire ball
Could have sworn I put the cut file with it
-
- 3 Star Member
- Posts: 307
- Joined: Fri Dec 21, 2012 5:21 pm
Re: fire ball
Nice file thanks....
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Re: fire ball
Great file thanks for sharing..
Steve
Steve
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Jan 20, 2010 6:55 pm
- Location: Canada
Re: fire ball
Thank you deyhard! Appreciate you putting your file up on here again...
-
- 2 Star Member
- Posts: 53
- Joined: Wed Apr 08, 2015 4:21 pm
Re: fire ball
Wanted to contribute another fireball firepit I drew up. Used a 4x8 sheet of 10 gauge, it went together great. It's a skull themed pit with sugarskulls, skulls, spider webs and flames too.
-
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Sun Jul 13, 2014 12:49 pm
Re: fire ball
nice file
-
- 1.5 Star Member
- Posts: 42
- Joined: Mon Jul 13, 2015 6:55 pm
Re: fire ball
Very nice! i know what im doing this weeekend
-
- 1.5 Star Member
- Posts: 27
- Joined: Tue Dec 01, 2015 10:40 pm
Re: fire ball
very nice thanks
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: fire ball
Nice file thanks for the share
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics