Been trying to trace this with Corel no luck any help would be appreciated
Terry
Help with Trace
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Help with Trace
Terry, the image is too small to really do anything with it so if you have a larger image, try this.
Open the image in Corel Photopaint (NOT DRAW) then convert the image to a 1 bit color black and white drawing, make sure it is line art and not halftone or any of the other selections. This will remove all the color and replace it with a solid black and white drawing. Basically it will remove the green and brown and if there is any gradients, it will change those to solid black as well.
Once done you can then copy the image and past it into a new blank document in Corel DRAW. Once there, use the trace function to trace the image. You should get a pretty good trace from it now. Once traced, edit as needed. let me know how that goes for you and if you have any problems.
Hope this helps.
Open the image in Corel Photopaint (NOT DRAW) then convert the image to a 1 bit color black and white drawing, make sure it is line art and not halftone or any of the other selections. This will remove all the color and replace it with a solid black and white drawing. Basically it will remove the green and brown and if there is any gradients, it will change those to solid black as well.
Once done you can then copy the image and past it into a new blank document in Corel DRAW. Once there, use the trace function to trace the image. You should get a pretty good trace from it now. Once traced, edit as needed. let me know how that goes for you and if you have any problems.
Hope this helps.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Help with Trace
Here is a start, but not ready to cut. I have included a bmp and dxf as well as the original blown up, of the picture for you to work with
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here