Fire Rescue Maltese Cross

Post by **Richard Grove** » Thu Jun 25, 2015 12:46 pm

Here is a project that I put together for a member of our local volunteer fire department. I think I got the original fire rescue logo off this site several years ago. I added the firefighter's badge number and name to the crest. I cut both parts out of 14ga mild steel. The crest is painted fire engine red and the back plate is painted gloss black. I used silicone to glue the 2 parts together. It was one of those projects that worked out just like you want them to. I would enjoy seeing your custom designs.

Fire Rescue Meyer.png

FIRE RESCUE MEYER.dxf

FIRE RESCUE MEYER shadow.dxf

Post by **sbest1** » Thu Jun 25, 2015 1:50 pm

Thanks for sharing.

Post by **grindergary** » Thu Jun 25, 2015 2:33 pm

Here is one I finally got traced. It cut nice at 24x24.

firefighter .dxf

Post by **Zippo** » Mon Jul 06, 2015 4:53 pm

Thanks for posting.

Post by **Gearheadmex** » Thu Jul 09, 2015 8:42 am

Very Nice! Thanks

jsd010 · Post by **jsd010** » Thu Jul 09, 2015 12:33 pm

Here is one I did about 1.5 years ago for a local firefighter.

fire shield.dxf

Post by **Rem300wm** » Thu Jul 09, 2015 1:22 pm

Hello to All

Thank You for sharing the files.

Rem.

covingtoncg · Post by **covingtoncg** » Wed Jul 19, 2017 10:05 pm

Thank You for sharing the files. I had a neighbor ask about something like this just the other day. Huge help. Thanks again

Fire Rescue Maltese Cross

Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross

Re: Fire Rescue Maltese Cross