tool holder

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

tool holder

Post by HaasMetalDesigns »

I was going to start selling them but it never happened I have 3 of them in my shop and they hold over 37 tools in one spot the on line tool path are bend lines

Image
tool holder.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

flimmy
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Feb 21, 2015 5:18 pm
Location: Mt. Pleasant

Re: tool holder

Post by flimmy »

Thanks for sharing do you have a pic of it all finished ?
cross-trax
1 Star Member
1 Star Member
Posts: 16
Joined: Thu Jan 24, 2013 4:31 pm

Re: tool holder

Post by cross-trax »

Thanks for the download, do you have any pics of the type of tools loaded into them?
james.davis
4 Star Member
4 Star Member
Posts: 1009
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: tool holder

Post by james.davis »

I can use that. :) Thanks for the post.
Jim
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

Re: tool holder

Post by HaasMetalDesigns »

grindergary
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 623
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: tool holder

Post by grindergary »

modnoc13 wrote:How about a video https://m.youtube.com/watch?v=_AgGwDr9BfI
Kool video :D

Thanks for the file.

Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
solomanb
2 Star Member
2 Star Member
Posts: 76
Joined: Fri Jul 01, 2011 10:47 pm
Location: Tulliby Lake Alberta Canada

Re: tool holder

Post by solomanb »

Thanks Dude
I am going to make one for work and one for home.....
Solomanb
beefy
4.5 Star Member
4.5 Star Member
Posts: 1504
Joined: Fri Jan 18, 2013 3:19 am

Re: tool holder

Post by beefy »

Thanks heaps Modnoc13,

I absolutely love tool storage stuff, yours is a good one. I often look at how wasteful of space some storage ideas are. It's amazing just how much stuff you can cram into a given space with careful design.

Love the bit at the end of the video, and that tool is built in for free :D

Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: tool holder

Post by Capstone »

thanks for sharing
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7754
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: tool holder

Post by acourtjester »

Thanks for posting look like it has a place on most shops
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
I Lean
3 Star Member
3 Star Member
Posts: 395
Joined: Sun Jan 02, 2011 11:03 pm

Re: tool holder

Post by I Lean »

What are the three "teeth" for in the rectangle that holds grinder discs? I watched the video but couldn't pick those out.

Thanks for the file!
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

Re: tool holder

Post by HaasMetalDesigns »

Bend them up to hold your 4.5 disks
kkroger
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sat Apr 26, 2014 7:56 pm

Re: tool holder

Post by kkroger »

Similar to Troy's Clutter Catcher from SWAG...

I like the Grinder racks the best, I modified the design to hold just the three grinders, what do you make it from?
11 Ga?
biggator850
2 Star Member
2 Star Member
Posts: 72
Joined: Fri Dec 26, 2014 9:52 am
Location: Mexico Beach, FL

Re: tool holder

Post by biggator850 »

Man that is AWESOME! Thanks for posting! Can't wait to get one built for my shop.

I need to come up with something like this for my kids toys. Always tripping over a scooter or a nerf gun. Better yet a rack to hang the kids on! Nothing worse than bending over concentrating on a off balance weld and getting nailed in the back by a foam bullet! :lol: :lol:

BC
jshan82
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Tue Nov 11, 2014 5:13 pm

Re: tool holder

Post by jshan82 »

awesome design, awesome video. A big thank you.
chattacuda
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 47
Joined: Fri Mar 15, 2013 11:33 am

Re: tool holder

Post by chattacuda »

thanks so much! Looks like will really help me unclutter my table!
chattacuda from Dayton, Tennessee
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
User avatar
Sampson Jones
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 333
Joined: Mon Jul 25, 2011 9:30 pm

Re: tool holder

Post by Sampson Jones »

Thanks !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
Davec107
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 20
Joined: Mon Aug 15, 2011 1:31 pm

Re: tool holder

Post by Davec107 »

Thank you for the share, cut one last night and cleared up all the crap I had on my welding table... Dave
conradestrada
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 161
Joined: Wed Dec 21, 2011 4:43 pm

Re: tool holder

Post by conradestrada »

I am impressed god only knows most of us are type "A" personalities just look at the smart ass comments. And he also knows we are not organized at all look at our photos shit every where. I will damn sure cut one of those out and weld one to all six tables and now my guy's have no excuse they can't find shit THANKS A BUNCH! And thanks for the video cuz god also knows this A.D.D. does not let me sit long enough to read instructions! Great Job
Binderman
2 Star Member
2 Star Member
Posts: 81
Joined: Wed Jan 07, 2015 7:15 pm
Location: North Central Texas.

Re: tool holder

Post by Binderman »

VERY NICE!!

Thanks for the share!!

Might you have a .DXF file of the guy tig welding in your logo?? My son is in welding school and burning lots of rod in his TIG lab and it would be cool for a receiver hitch cover.

Thanks again for the organizer!!
User avatar
Ghost
2 Star Member
2 Star Member
Posts: 51
Joined: Tue Aug 06, 2013 2:26 pm
Location: Richland, MS
Contact:

Re: tool holder

Post by Ghost »

Very nice setup modnoc13, thanks for sharing.

One question what is the standard overall size you cut these to? L X W

Thanks,
Jason
601Metalworks
Richland, MS

Arclight Dynamics 9600
Hypertherm PM65

jason@601metalworks.com
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

Re: tool holder

Post by HaasMetalDesigns »

Ghost wrote:Very nice setup modnoc13, thanks for sharing.

One question what is the standard overall size you cut these to? L X W

Thanks,
Jason
Yes that is the size I cut them too
User avatar
Ghost
2 Star Member
2 Star Member
Posts: 51
Joined: Tue Aug 06, 2013 2:26 pm
Location: Richland, MS
Contact:

Re: tool holder

Post by Ghost »

modnoc13 wrote:
Ghost wrote:Very nice setup modnoc13, thanks for sharing.

One question what is the standard overall size you cut these to? L X W

Thanks,
Jason
Yes that is the size I cut them too

No I was asking you what is the L X W you cut them to?
601Metalworks
Richland, MS

Arclight Dynamics 9600
Hypertherm PM65

jason@601metalworks.com
HaasMetalDesigns
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Mon Mar 18, 2013 4:40 am

Re: tool holder

Post by HaasMetalDesigns »

23 by 11.7024 is the cut size
User avatar
Ghost
2 Star Member
2 Star Member
Posts: 51
Joined: Tue Aug 06, 2013 2:26 pm
Location: Richland, MS
Contact:

Re: tool holder

Post by Ghost »

modnoc13 wrote:23 by 11.7024 is the cut size

Thanks!!!!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”