Here is the dxf of an airplane with a radial engine I did a while back. The model of the plane is a Zenith 750.
Radial engine plane
- levesquea
- 2.5 Star Member
- Posts: 118
- Joined: Wed Jul 27, 2011 7:02 pm
- Location: Harrington, Quebec, Canada
Radial engine plane
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: Radial engine plane
Thanks for the post, if you zoom waaay into where the right rear strut meets the plane body you'll find a teeny tiny line that intersects. Probably never cause a cutting problem but you never know.
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
- levesquea
- 2.5 Star Member
- Posts: 118
- Joined: Wed Jul 27, 2011 7:02 pm
- Location: Harrington, Quebec, Canada
Re: Radial engine plane
MetalTorcher wrote:Thanks for the post, if you zoom waaay into where the right rear strut meets the plane body you'll find a teeny tiny line that intersects. Probably never cause a cutting problem but you never know.
Yes Jason, you are right. This file needs a bit of tweaking. I cut mine after changing and fixing some intersects.
I just cant find my PCM file . But I will look again and post it if I find it.
Thanks for pointing this out, i forgot to mention it requires scrutiny before cutting.
Andre
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Plasmacam 4x4
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10
Hypertherm Powermax 45
Everlast power Tig 255
Affinity Designer
Alibre expert
Vectric Aspire 10