I made this for a man for his son that was killed in a car wrek in his memory.
forever young
-
- 2 Star Elite Contributing Member
- Posts: 70
- Joined: Mon Nov 17, 2008 1:10 am
forever young
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7807
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: forever young
nice thanks
I wanted to do that but the year keep going by now they look like telephone poles a 60 MPH
I wanted to do that but the year keep going by now they look like telephone poles a 60 MPH
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: forever young
Thanks for posting.
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: forever young
Are you cutting this on a laser?
The bars all the way to the left have a space of 0.742 . . .
Any chance you have one cut & a picture with a clear shot of the left side . . .
I must be doing something wrong, because in 16 gauge I am blowing away spaces that close . . .
Any suggestions . . . appreciated . .
Thanks, trying to learn . . .
Steve
The bars all the way to the left have a space of 0.742 . . .
Any chance you have one cut & a picture with a clear shot of the left side . . .
I must be doing something wrong, because in 16 gauge I am blowing away spaces that close . . .
Any suggestions . . . appreciated . .
Thanks, trying to learn . . .
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 2 Star Elite Contributing Member
- Posts: 70
- Joined: Mon Nov 17, 2008 1:10 am
Re: forever young
I'm cutting it with plazma & yes I was holding my breath...Don't have a pic up close. My table got to where it would't cut so fine so I cleaned off all slids and regreased all made a big diff. hypertherm 1000 40 amp tip.
-
- 2 Star Elite Contributing Member
- Posts: 70
- Joined: Mon Nov 17, 2008 1:10 am
Re: forever young
By the way I cut it out of 12ga
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: forever young
That might make a difference . . . I have to be at 200 IPM on 16 gauge . . .@ 40 amps . . .lewi444 wrote:By the way I cut it out of 12ga
I keep experimenting for that dross free cut . . . I get beautiful on front side . . . and hand scrape-able on back for dross.
Cutting thicker stuff I run fine . . .
I amp waiting for that 30 amp nozzle I'm sure Hypertherm is developing . . . ( hear me Jim)
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana