Could someone please convert this to a DXF.
I have tried all morning with not much luck.
Also, any ideas on software that you may use to convert.
I need to get set up to convert this stuff myself.
Any help would be great.
Thank you!
Help with DXF conversion
-
elkriverfab
- 3 Star Member
- Posts: 491
- Joined: Mon Jul 27, 2009 4:49 pm
Help with DXF conversion
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
"OK, Now hold my beer and I'll try it"
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 392
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Help with DXF conversion
I could not get a good trace on it, this is what I got. Hope you can work with it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
elkriverfab
- 3 Star Member
- Posts: 491
- Joined: Mon Jul 27, 2009 4:49 pm
Re: Help with DXF conversion
Chopper John,
Thanks for helping.
I am sure it will be fine.
Will go through it and fine tune.
Again, thanks a bunch for your help.
Thanks for helping.
I am sure it will be fine.
Will go through it and fine tune.
Again, thanks a bunch for your help.
"OK, Now hold my beer and I'll try it"
