It is currently Sun Dec 17, 2017 4:27 pm

 

Fire Pit/Cooking Goodies Sharing Thread

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
Thumper
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Fire Pit/Cooking Goodies Sharing Thread

Postby Thumper » Mon Sep 15, 2014 1:12 am

I'm just tossing this out their to see if their is any interest in having one thread with everyone's fire pit files their willing to share or have previously uploaded on a separate posting. Just thought it would be kinda cool to have one thread with all of the pits and cooking goodies in it since cooler weather is right around the corner. Here are a few to start it off, lets see if anyone else is willing to play :D
Image
jalapenotexas.dxf

Octagon Slanted Firepit.dxf

36 hex pit.dxf

48-pit.dxf

36-pit.dxf

24-pit.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Larry83301
Elite Contributing Member
Elite Contributing Member
Posts: 1766
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Larry83301 » Mon Sep 15, 2014 1:44 am

Thanks for the file! Hope some add to your thread.

Larry

Charlieboy
Posts: 84
Joined: Wed Aug 07, 2013 12:42 pm
Location: Huntsville, Texas

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Charlieboy » Mon Sep 15, 2014 9:32 am

Highly appreciated!! :D

kevin53
Elite Contributing Member
Elite Contributing Member
Posts: 179
Joined: Sat Oct 23, 2010 5:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby kevin53 » Mon Sep 15, 2014 10:38 am

Here is one that I donated fund raiser a classic car guy injured at the race track. DUMMIE ME , I forgot to take a picture of it.
Image
36 IN CHEVY FIRE PIT.pcm

CHEVY COUNTRY FIREPIT GTATE.pcm

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


kevin53
Elite Contributing Member
Elite Contributing Member
Posts: 179
Joined: Sat Oct 23, 2010 5:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby kevin53 » Mon Sep 15, 2014 10:55 am

For those of you that cannot use PCM
CHEVY COUNTRY FIREPIT GTATE.dxf

36 IN CHEVY FIRE PIT.zip

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Larry83301
Elite Contributing Member
Elite Contributing Member
Posts: 1766
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Larry83301 » Mon Sep 15, 2014 11:10 am

Very nice! Love the use of the cars on all eight panels. :D :D :D

Larry

User avatar
CNCCAJUN
Elite Contributing Member
Elite Contributing Member
Posts: 1117
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby CNCCAJUN » Mon Sep 15, 2014 11:15 am

Thank you . . .

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana

cbassjr
Elite Contributing Member
Elite Contributing Member
Posts: 303
Joined: Fri Dec 21, 2012 5:21 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby cbassjr » Mon Sep 15, 2014 1:21 pm

Thanks always looking for new fire pits and ideas. Like the thread idea.

User avatar
Oldsarge
Elite Contributing Member
Elite Contributing Member
Posts: 654
Joined: Tue Feb 22, 2011 10:12 am
Location: Lacey, WA

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Oldsarge » Mon Sep 15, 2014 2:17 pm

Thanks for the post... I love the idea of rolling up a bunch of files into one general heading like this.... I've somewhat organized my file structure on my thumb drives into broad categories like this and it really helps finding files, especially when you haven't used one in a while, and there's hundreds of files to wade through!

Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"

hooked
Posts: 55
Joined: Wed Oct 17, 2012 12:37 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby hooked » Mon Sep 15, 2014 6:09 pm

Thumper , thanks for the shares, i was resently ask for a small 24" pit that was heavy duty! thanks!! kyle

Thumper
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Thumper » Tue Sep 16, 2014 12:58 am

cbassjr wrote:Thanks always looking for new fire pits and ideas. Like the thread idea.



Well add to it :D Im always looking for ideas to :lol:


245 Views and only a couple add's. Come on guys this is the sharing page, not the taking page. Add some new stuff or I'm going to start new threads every hour asking how to build a stick man file and if someone could build me a circle inside a box file in dfx by tomorrow for a customers brothers cousins volunteer nympho sex ed class held at the local adult book store to raise money for the blind pigmies in southern Vaginia Falls :D :lol:

In short add some stuff Allready Goobers

User avatar
weldor2005
Elite Contributing Member
Elite Contributing Member
Posts: 357
Joined: Fri Mar 01, 2013 4:22 pm
Location: Southern Kansas City Area
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby weldor2005 » Tue Sep 16, 2014 7:27 am

I might as well post it here, as an FYI for those of us who like to burn things, I made a 36" out of 3/16" and I haven't had it for a year yet and I've warped the sides pretty good from the heat.
David Finch CWI

Plenty of welders
Plasmacam 4x4 with DHC2
PowerMax 45
Lots of other toys

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1363
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby tnbndr » Tue Sep 16, 2014 9:18 am

Here are a couple of rolled ring designs I've done over the years.
These are set up to cut from 5'x10' sheets and then just roll to diameter (~37") and weld the seam. You can adjust them however you like to fit your sheet size.
Image
Deer-Turkey Fire Ring.dxf

Sailing Fire Ring 14.dxf

Farm Fire Ring.dxf

Duck Landing Fire Ring.dxf

Bear Fire Ring 14.dxf

Coyote Fire Ring.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

scottlane
Posts: 84
Joined: Fri Aug 21, 2009 7:23 pm
Location: Texas

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby scottlane » Tue Sep 16, 2014 10:35 am

Thanks for the files. You guys make getting started on a project a little easier.

Thank you again for the great files.


:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:

aicomp
Elite Contributing Member
Elite Contributing Member
Posts: 224
Joined: Wed Feb 02, 2011 5:15 pm
Location: Susanville, California
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby aicomp » Tue Sep 16, 2014 11:24 am

Wow, This is a Great thread. I am designing some fire pits now and will share when I get them done.
Thanks for the greaat files.
Mike
http://www.PenningtonFab.com
Torchmate 3 with AVHC
Hypertherm 1250
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2821
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby acourtjester » Tue Sep 16, 2014 12:46 pm

Thanks for the upload

have fun
Tom
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Thumper
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Thumper » Tue Sep 16, 2014 2:40 pm

You guys are very welcome for my files and I appreciate the others being shared as well.... If we can continue to make this thread roll with new files uploaded to it I will continue to share more of mine. I have lots of off the wall fire pits and cooking goodies. I honestly think its a healthy way to conduct ourselves in he form of sharing ideas and files. If you pick up something new you have never thought of then this thread was a success.

User avatar
Chopper John
Elite Contributing Member
Elite Contributing Member
Posts: 396
Joined: Mon Aug 24, 2009 10:22 pm
Location: Des Plaines, IL
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Chopper John » Tue Sep 16, 2014 8:20 pm

Here is a grill top I did awhile back for a buddy to replace a rusted one on his Weber. I cut it from 3/16 stainless steel. Just tack weld the handles in the upright position. I reversed the logo so it would be correct if seared on a burger.
Image
John Deere Grill (Weber).dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Chopper John
Mad City Cycles, Inc.

"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."

reidy01
Posts: 173
Joined: Sun Aug 21, 2011 3:32 am

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby reidy01 » Tue Sep 16, 2014 11:11 pm

Cool thank you for sharing.

User avatar
wilber
Posts: 155
Joined: Sun May 11, 2014 8:23 am

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby wilber » Tue Sep 16, 2014 11:44 pm

i am just starting to play with designs for them. I need to build a roller before but once i get a couple designs i will post them. just working on repeating patterns and some off the wall stuff just to try out.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1363
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby tnbndr » Wed Sep 17, 2014 8:49 am

Just an FYI on creating the files for the rolled fire rings, you need to leave enough material top and bottom so that they will hold their shape and be sturdy. It helps to leave as much material as you possibly can and still get the design idea across. Don't ask me how I know this!
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

Thumper
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby Thumper » Wed Sep 17, 2014 12:59 pm

I'm about to purchase a powered roller and give them a whirl myself :D

grindergary
Elite Contributing Member
Elite Contributing Member
Posts: 610
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby grindergary » Wed Sep 17, 2014 1:49 pm

Wow, thank you all for the great files!

Soon I hope to be able to contribute something back to the forum.

Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel DrawX6, V Carve Pro
Miller CTS 280 Miller Mig

cbassjr
Elite Contributing Member
Elite Contributing Member
Posts: 303
Joined: Fri Dec 21, 2012 5:21 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby cbassjr » Wed Sep 17, 2014 2:47 pm

Super thread and super idea. Would be nice to start some other threads would save hours of time..... plus people could post to the right area of interest....

User avatar
otisa2007
Elite Contributing Member
Elite Contributing Member
Posts: 304
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Postby otisa2007 » Thu Sep 18, 2014 6:23 am

here is one that i modified from a couple diffferent fire pits i got from here hope someone can use it great idea on the pire pit thread
fire-pit5.jpg

blank fire pit.pcm

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here



Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: Bruner81, canolaboy, codybkid69, Flash, hemichargersrt8, Hot Metal, Johnt357, LJJJBAWO, Power Stroke and 19 guests