help with DXF-Name Ornament -

help with DXF-Name Ornament

5 posts • Page 1 of 1

elkriverfab: 3 Star Elite Contributing Member; Posts: 490; Joined: Mon Jul 27, 2009 4:49 pm

Post by elkriverfab » Tue Dec 10, 2013 1:28 pm

Making a christmas gift and need help turning this from a JPEG into a DXF.
Fonts are not my strong point!
Any help would be great.
Thanks.

"OK, Now hold my beer and I'll try it"

larrycameron44: 3.5 Star Member; Posts: 579; Joined: Sun Oct 31, 2010 4:12 pm; Location: Auckland New Zealand

Post by larrycameron44 » Tue Dec 10, 2013 1:36 pm

SEE IF THIS HELPS

LARRY NZ

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

elkriverfab: 3 Star Elite Contributing Member; Posts: 490; Joined: Mon Jul 27, 2009 4:49 pm

Post by elkriverfab » Tue Dec 10, 2013 1:41 pm

Thanks Larry, helped a lot.
If I can ever help you just let me know.

"OK, Now hold my beer and I'll try it"

abmagrum: 3.5 Star Member; Posts: 541; Joined: Sun Feb 10, 2013 3:13 pm; Location: mich.

Post by abmagrum » Tue Dec 10, 2013 1:43 pm

try this might need a little work

Last edited by abmagrum on Tue Dec 10, 2013 9:27 pm, edited 1 time in total.

Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set

TAP: 2.5 Star Member; Posts: 131; Joined: Fri May 03, 2013 9:47 pm; Location: ND-The Rich Bottom Of Lake Agassiz

Post by TAP » Tue Dec 10, 2013 6:07 pm

Just Practicing..

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

5 posts • Page 1 of 1