It is currently Wed Sep 19, 2018 11:02 pm

 

Vertical bender using JD2 dies

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
redheadfred
Posts: 69
Joined: Thu Apr 21, 2016 5:37 pm

Re: Vertical bender using JD2 dies

Postby redheadfred » Wed Apr 19, 2017 6:47 pm

Figured it out .... Thanks
Arclight 4x4
Hypertherm Pm45
Lincoln 256 Mig
Precision Tig 275
Baileigh 50 Ton Press
Quincy 2 stage 5Hp compressor

Flawlessfab22
Posts: 1
Joined: Fri Oct 27, 2017 5:33 pm

Re: Vertical bender using JD2 dies

Postby Flawlessfab22 » Fri Oct 27, 2017 5:55 pm

I can’t seem to get access to the bender dxf file at the beginning post
I’m a paying member
There something I’m missing

I Lean
Posts: 399
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Postby I Lean » Mon Oct 30, 2017 11:29 pm

I don't know why you can't download the files, but I do think it's awesome this thread is still trickling along after 5 years. :D

Prototypetom
Posts: 7
Joined: Tue Jul 04, 2017 5:24 am

Re: Vertical bender using JD2 dies

Postby Prototypetom » Fri Nov 17, 2017 5:52 am

Can this be used with model 3 dies that's all I can get

I Lean
Posts: 399
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Postby I Lean » Fri Nov 17, 2017 6:16 am

Yes, it's designed for use with Model 3 die sets.

Prototypetom
Posts: 7
Joined: Tue Jul 04, 2017 5:24 am

Re: Vertical bender using JD2 dies

Postby Prototypetom » Fri Nov 17, 2017 1:03 pm

fantasic going to give it a cut in next few weeks

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 06, 2017 11:53 am

I need file for tubing bender j.d..square

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Fri Dec 08, 2017 10:24 pm

I paid for file never got it

I Lean
Posts: 399
Joined: Sun Jan 02, 2011 11:03 pm

Re: Vertical bender using JD2 dies

Postby I Lean » Fri Dec 08, 2017 10:39 pm

The files are linked in the very first post of this thread, you can download them there.

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Sun Dec 10, 2017 6:05 pm

I paid for file can't download them they screw me

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Sun Dec 10, 2017 6:50 pm

redheadfred wrote:Figured it out .... Thanks

How do u download dfx file for vertical tubing bender jd2..

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Sun Dec 10, 2017 6:52 pm

Prototypetom wrote:fantasic going to give it a cut in next few weeks

How did u get off file I can't get it

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Sun Dec 10, 2017 6:56 pm

Legend199 wrote:
redheadfred wrote:Figured it out .... Thanks

How do u download dfx file for vertical tubing bender jd2..

How did u get dfx file I can't get it

nalin400m
Posts: 74
Joined: Wed Apr 13, 2011 2:07 pm
Location: Evansville, IN
Contact:

Re: Vertical bender using JD2 dies

Postby nalin400m » Sun Dec 10, 2017 8:01 pm

Legend199 wrote:I paid for file can't download them they screw me


Take a chill pill. All the files in this thread are still downloadable.
Nalin Manufacturing, LLC
Hypertherm Powermax 85
Bulltear Starlab 4'x8'

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 383
Joined: Thu Jul 24, 2008 11:15 am

Re: Vertical bender using JD2 dies

Postby plasmanewbie » Sun Dec 10, 2017 10:31 pm

:lol: Chill pill

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 7:56 pm

mav68erick wrote:Hello, I cut this file out over 5 Years ago for a friend that passed away and got back the vertical uprights. He wasn't able to finish it. I wanna finish it but no longer have the word doc that has the dimensions for the base.

Can anyone share the lengths of of the 3x3 tubing?

Thanks, I finally got my plasma cutter back online after moving and getting back into into things.

2 24in and 2 12 in 3x3

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 8:12 pm

tjenus wrote:Not sure if this is what you need, thanks KH





Parts list for completing vertical bender.docx

What spaces and bolts go where I can't figure it out

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 8:18 pm

I Lean wrote:
james.davis wrote:Ilean,
I noticed on your bender you have 2 springs is that needed or will one work?
Thanks,
Jim


One will work fine. I went with too light of a spring originally, so I had to double them up.

U have pic of how bender goes together with spacers I can't get it 704-273-6194

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 8:20 pm

How do the spacers go on the vertical tubing bender and how wide does the base need to be I can't get where spacers and bolts go

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 8:21 pm

Anyone now how spacers go on the vertical tubing bender and the bronze bushing goes 704-273-6194

Legend199
Posts: 13
Joined: Wed Dec 06, 2017 8:17 am

Re: Vertical bender using JD2 dies

Postby Legend199 » Wed Dec 20, 2017 8:34 pm

I Lean wrote:Here is the vertical bender I built, designed to use JD2 Model 3 die sets. You'll notice on the drawing, the hole for the main die pin is undersized--I did that so I could drill it out to 1.25" to press bronze bushings into. All the other holes are just plasma cut.

I cut this from two layers of 3/8" steel just so the holes would be easier to get good quality, but if you wanted to just cut it from thicker material just don't cut the doubler pieces.

The second file I cut from 1/4" steel, and it's to hook the garage door extension spring underneath the ram, to retract everything when you release pressure.

Third file (Word doc) is just a parts list to complete the bender the same way I did mine. By no means is it the only way to do it, it's just my way. :D If you use different thickness materials, you may need to adjust the bolt and spacer lengths. How do the spacer go I can't figure it out u have pics or call me 704-273-6194

Image
Vertical Bender - JD2 dies.dxf

Vertical Bender - springmount.dxf

Parts list for completing vertical bender.docx


do u no where the spacers go how wide is it at ate base is it 3 1/4 I.d. there is a 2. 3/8 in spacer a. 4. 1/2 spacers I u have pic of how it all goes

tylerd
Posts: 88
Joined: Fri Jan 20, 2017 3:25 am

Re: Vertical bender using JD2 dies

Postby tylerd » Sat Dec 23, 2017 3:48 am

Badness!!
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD

Pecanman
Posts: 2
Joined: Mon Feb 20, 2017 11:54 pm

Re: Vertical bender using JD2 dies

Postby Pecanman » Wed Jan 31, 2018 10:02 pm

I know this is a super old thread, but thanks for the files. I just finished mine today. I only have a hypertherm 30xp so I had to approach it a little differently.first I marked all the holes with the the plasma cutter and cut all the pieces out of 1/2". Then I lined up the corresponding pieces and tacked them together. I used my drill press to drill all the marked spots to size. I had everything ( even the right size bushings and the hydr cylinder) except the 5/8 bolts on hand so it was a very cheap build and I learned a lot and got a useful tool out of the process.
image.jpeg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Wymanj
Posts: 6
Joined: Fri Jan 29, 2016 10:08 pm

Re: Vertical bender using JD2 dies

Postby Wymanj » Fri Feb 09, 2018 1:29 pm

The jd2 die set I bought from jd2 has all 1” holes in it. I know the main center hole should be 1” but I guess I figured the others would be 7/8” like what we put in the arms. Is this correct or have they changed the dies? Can someone please confirm? The die set of have is 1.75” x 5.5”clr round bought directly from jd2.com. Thanks, Jordan

pvanweelden
Posts: 2
Joined: Mon Oct 16, 2017 5:31 pm

Re: Vertical bender using JD2 dies

Postby pvanweelden » Wed Mar 14, 2018 12:03 pm

i wanted to say thanks to I Lean for uploading this- i am in the process of building one. i received a 1" 180 degree die from jd2 and the main hole and the guide piece hole are both 1.25". i am putting a bronze sleeve similar to the bushing used in the main hole on the bender plates. below is a couple of pics- i did a quick mock up to see how things were fitting (my base plates are attached to the outside instead of the inside, and my die was backwards, but everything is working as intended)

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here



Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: Jupiter, Satterley and 13 guests

Easyscriber engrave attachment for Hypertherm torch's