Butterfly Bench
-
- 1 Star Member
- Posts: 11
- Joined: Tue Aug 18, 2009 1:13 pm
Butterfly Bench
Looking for a pattern to make a butterfly bench. The ones where the wings are the sides and the seat is also a part of the butterfly.
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Butterfly Bench
Try this post and just modify the file to a bench.
http://www.plasmaspider.com/viewtopic.php?f=6&t=7428
http://www.plasmaspider.com/viewtopic.php?f=6&t=7428
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Apr 03, 2015 8:44 am
Re: Butterfly Bench
I have some patterns that I drew up & then were made by guys at our shop but I am not a contributing member. E-mail me if you have any further need. I have these in .dwg & .dxf format. I created these originally for making in stainless steel but I believe the only material we made these in was mild steel then have the finished product powder coated. Funny I can attach & post but can't download anything without paying.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 35
- Joined: Thu Apr 28, 2011 12:28 pm
Re: Butterfly Bench
[quote="tnbndr"]Try this post and just modify the file to a bench.
Already done.
We made it using 10 ga
Already done.
We made it using 10 ga
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here