Floating Torch set up for sheetcam, mach3, and proma 150

SheetCam related questions and tips can be posted here
Post Reply
TrinityFabworks
2.5 Star Member
2.5 Star Member
Posts: 186
Joined: Tue Apr 17, 2018 2:36 pm

Floating Torch set up for sheetcam, mach3, and proma 150

Post by TrinityFabworks »

Ok, I'm very inexperienced with cnc and just finished building my 4x4 table. I'm have sheetcam and mach 3 plasma. I'm now ready to test fire my table and I had a question. I built a floating head, but I need to know how to put that in the programming now. I have a proma 150 thc so I'm not sure if that will affect it or not. I've seen people talking about macros and some other things, but it is all a foreign language to me. I've got it running programs just fine, but I need it to touch off before every cut and I'd also like to have it find the X and Y zero to zero itself before it runs a job. If you could help me out I'd greatly appreciate it!
Post Reply

Return to “SheetCam”