It is currently Mon Sep 24, 2018 7:35 pm

 

Starfire Controller

Post your questions or tips on SheetCam software in this topic.
Jawz
Posts: 2
Joined: Fri Jun 22, 2018 3:37 am

Starfire Controller

Postby Jawz » Mon Jul 30, 2018 6:17 am

Can anyone tell how to get the Starfire Controller to read the GCode from Sheetcam
I assume you need to use a postscript, but which one.

Please Help.

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3115
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Starfire Controller

Postby acourtjester » Mon Jul 30, 2018 11:00 am

It is called a Post Processor and you can contact Les at SheetCam via their web site use the contact us function
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Les Newell
Posts: 91
Joined: Tue Mar 22, 2016 10:30 am

Re: Starfire Controller

Postby Les Newell » Mon Jul 30, 2018 11:07 am

I have attached a couple of posts that should work with your controller. I would recommend that you try the 'Baileigh Starfire' post first. If you have problems with that one, try the no arcs version.

Open the zip file and save the included files to any convenient folder on your computer then run SheetCam and go to Options->machine->post processor. Click on the 'Import post' button. Using the box that appears, navigate to your post and open it. Go back to Options->machine->post processor and make sure your post is selected.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here



Return to “SheetCam”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's