Tip Size Default value 45 amp

SheetCam related questions and tips can be posted here
Post Reply
User avatar
exapprentice
3 Star Member
3 Star Member
Posts: 357
Joined: Mon Jul 06, 2015 1:57 pm
Location: Wiltshire, UK

Tip Size Default value 45 amp

Post by exapprentice »

Hi everyone

just asking if there is a way of editing / changing the "Tip Size" from the default 45 :?:
I have tried to edit the "PLASMA TOOL" where it states "Tip size - amps" but it always seems to defaults back to 45 has anyone else noticed this or found a way of changing the value :?: :?:
Best Regards to all
Exapprentice :D
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting :(
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1924
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Tip Size Default value 45 amp

Post by djreiswig »

I think the tip size setting just displays in the code. I don't believe it actually does anything as far as setup. One of the posts has an error where two numbers are swapped and it won't allow the setting to stick.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: Tip Size Default value 45 amp

Post by sphurley »

Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Post Reply

Return to “SheetCam”