sheetcam problem

SheetCam related questions and tips can be posted here
Post Reply
Fawad Afzal
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Tue Jun 30, 2015 8:48 pm

sheetcam problem

Post by Fawad Afzal »

sheetcam not working properly when i do simulation it says your feed rate is 0 and when i going to make g codes its file is 0byes
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: sheetcam problem

Post by tnbndr »

Go to the Help/About and make sure it is a licensed version.??
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1352
Joined: Tue Feb 28, 2012 6:47 pm

Re: sheetcam problem

Post by tcaudle »

A license is not required to do the first 150 lines of code unless its a pirated version. So you should get SOME code If you have operations defined with a tool and feed rates and have the contours on the layer associated with the operation. You should see the blue wider toolpaths as you define the operations. You have to select the correct POST processor to get code.
Fawad Afzal
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Tue Jun 30, 2015 8:48 pm

Re: sheetcam problem

Post by Fawad Afzal »

thanks my problem is solved
Post Reply

Return to “SheetCam”