Open paths are being closed

SheetCam related questions and tips can be posted here
Post Reply
RAD
2 Star Member
2 Star Member
Posts: 81
Joined: Fri Aug 28, 2015 3:17 pm

Open paths are being closed

Post by RAD »

Opens are being closed what can be causing this?
Attachments
20170513_203547_Easy-Resize.com.jpg
20170513_203532_Easy-Resize.com.jpg
20170513_203628_Easy-Resize.com.jpg
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
RAD
2 Star Member
2 Star Member
Posts: 81
Joined: Fri Aug 28, 2015 3:17 pm

Re: Open paths are being closed

Post by RAD »

Ok found the problem: overcut should be set to 0" for open paths
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
jakeg
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Fri Jun 17, 2016 8:14 pm

Re: Open paths are being closed

Post by jakeg »

Carefully continue to read all the options. Off set open paths and lead in on open paths is checked
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Open paths are being closed

Post by acourtjester »

If I am cutting lines (open paths) I use "no offset" and no lead ins.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Post Reply

Return to “SheetCam”