It is currently Mon Dec 11, 2017 3:51 pm

 

Open paths are being closed

Post your questions or tips on SheetCam software in this topic.
RAD
Posts: 72
Joined: Fri Aug 28, 2015 3:17 pm

Open paths are being closed

Postby RAD » Sat May 13, 2017 9:17 pm

Opens are being closed what can be causing this?

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD

RAD
Posts: 72
Joined: Fri Aug 28, 2015 3:17 pm

Re: Open paths are being closed

Postby RAD » Sat May 13, 2017 9:58 pm

Ok found the problem: overcut should be set to 0" for open paths
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD

jakeg
Posts: 41
Joined: Fri Jun 17, 2016 8:14 pm

Re: Open paths are being closed

Postby jakeg » Sat Jun 17, 2017 8:53 am

Carefully continue to read all the options. Off set open paths and lead in on open paths is checked

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 2817
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Open paths are being closed

Postby acourtjester » Sat Jun 17, 2017 10:09 am

If I am cutting lines (open paths) I use "no offset" and no lead ins.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig


Return to “SheetCam”

Who is online

Users browsing this forum: No registered users and 2 guests