It is currently Mon Sep 24, 2018 9:29 pm

 

Floating Torch set up for sheetcam, mach3, and proma 150

Post your questions or tips on SheetCam software in this topic.
TrinityFabworks
Posts: 29
Joined: Tue Apr 17, 2018 2:36 pm

Floating Torch set up for sheetcam, mach3, and proma 150

Postby TrinityFabworks » Tue Jul 31, 2018 9:51 pm

Ok, I'm very inexperienced with cnc and just finished building my 4x4 table. I'm have sheetcam and mach 3 plasma. I'm now ready to test fire my table and I had a question. I built a floating head, but I need to know how to put that in the programming now. I have a proma 150 thc so I'm not sure if that will affect it or not. I've seen people talking about macros and some other things, but it is all a foreign language to me. I've got it running programs just fine, but I need it to touch off before every cut and I'd also like to have it find the X and Y zero to zero itself before it runs a job. If you could help me out I'd greatly appreciate it!

Return to “SheetCam”

Who is online

Users browsing this forum: No registered users and 2 guests

Easyscriber engrave attachment for Hypertherm torch's