tracker software

General software related questions should be posted here.
Post Reply
GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

tracker software

Post by GWS.Arkansas »

Well Thank You
Last edited by GWS.Arkansas on Thu Sep 08, 2011 9:17 pm, edited 1 time in total.
User avatar
Team Tracker
2.5 Star Member
2.5 Star Member
Posts: 104
Joined: Thu Nov 18, 2010 7:36 pm

Re: tracker software

Post by Team Tracker »

The difference between the V3 and V5 software is the way it communicates with the controller. V3 uses the LPT port and V5 is our latest and communicates via Ethernet. I looked up your history and see you are running a non-shielded Ethernet cable and that a shielded replacement is on it's way. Justin has you operating on V3 using the LPT port in the meantime.
You can still obtain the same cut quality you are accustomed to with the V5 software, V3 is not the reason you are getting rough edges. I know its Labour day long weekend but we offer 24/7 technical support so just give us a call so we can check your V3 settings and get you on the right track anytime.
1-800-590-7804
WSS
3 Star Member
3 Star Member
Posts: 427
Joined: Wed Sep 29, 2010 12:19 am

Re: tracker software

Post by WSS »

Reid T wrote:I know its Labour day long weekend but we offer 24/7 technical support so just give us a call so we can check your V3 settings and get you on the right track anytime.
Service with a smile? Not many out there offering that. Keep up the good work.

WSS


Last bumped by GWS.Arkansas on Sun Sep 18, 2011 12:59 am.
Post Reply

Return to “General Discussion”