It is currently Mon Dec 18, 2017 1:33 pm

 

circles still not circles

Post your questions or tips on Tracker software in this topic.
Cbrbarnes
Posts: 51
Joined: Sun May 12, 2013 1:33 pm

circles still not circles

Postby Cbrbarnes » Tue Jun 09, 2015 6:50 pm

I'm running a current version of Command n Cut and doing my line work in Corel X7. I'm trying to create a 16" circle on my Tracker table. I've converted the ellipse into curves and everything looks good and smooth in Corel. Once in Command n Cut the circle becomes a series of straight lines again. Anybody dealt with this or have any ideas? I'm fresh out of things to try to correct this? Thanks

Corfabrication
Posts: 147
Joined: Mon Nov 03, 2014 2:04 pm
Location: Racine Wi
Contact:

Re: circles still not circles

Postby Corfabrication » Tue Jun 09, 2015 7:30 pm

i dont know how to help you with that, but here is a 16" circle if it helps.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
Team Tracker
Posts: 103
Joined: Thu Nov 18, 2010 7:36 pm
Contact:

Re: circles still not circles

Postby Team Tracker » Wed Jun 10, 2015 10:02 am

Cbrbarnes wrote:I'm running a current version of Command n Cut and doing my line work in Corel X7. I'm trying to create a 16" circle on my Tracker table. I've converted the ellipse into curves and everything looks good and smooth in Corel. Once in Command n Cut the circle becomes a series of straight lines again. Anybody dealt with this or have any ideas? I'm fresh out of things to try to correct this? Thanks


Your export settings are incorrect which is why your circles are coming out segmented. I know you purchased your Tracker table 2nd hand and have a fresh version of Corel installed so give me a call and we can go over your settings.
Image
1-800-590-7804

Cbrbarnes
Posts: 51
Joined: Sun May 12, 2013 1:33 pm

Re: circles still not circles

Postby Cbrbarnes » Thu Jun 11, 2015 8:11 pm

Reid T wrote:
Cbrbarnes wrote:I'm running a current version of Command n Cut and doing my line work in Corel X7. I'm trying to create a 16" circle on my Tracker table. I've converted the ellipse into curves and everything looks good and smooth in Corel. Once in Command n Cut the circle becomes a series of straight lines again. Anybody dealt with this or have any ideas? I'm fresh out of things to try to correct this? Thanks


Your export settings are incorrect which is why your circles are coming out segmented. I know you purchased your Tracker table 2nd hand and have a fresh version of Corel installed so give me a call and we can go over your settings.


I appreciate that. I've got a new controller and new Corel software. The only remaining pieces of the old table are the table itself and the steppers moving the head around. I will contact you soon, thank you very much

Cbrbarnes
Posts: 51
Joined: Sun May 12, 2013 1:33 pm

Re: circles still not circles

Postby Cbrbarnes » Tue Jun 16, 2015 5:44 am

Thanks Reid, I called in and got it all straightened out. It's been a real pleasure dealing with Tracker


Return to “Tracker Software”

Who is online

Users browsing this forum: No registered users and 1 guest