cut and command unresponsive

General software related questions should be posted here.
Post Reply
Predeorb
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Mon May 28, 2012 1:20 pm
Location: Dashwood
Contact:

cut and command unresponsive

Post by Predeorb »

HMMM....
When editing a plt file in cut and command, typically I use the join option which greatly reduces the number of objects. For example if I have 900 objects (lines) it would reduce the file to about 130 individual objects. I used coral to design the sheet and grouped them within corel but when they are imported into cut and command the grouping is not recognized. Is there something I am missing? The file that I am currently trying to join freezes cut and command. :?:

Nevermind....Justin from Tracker took care of things....I am not sure how they do it!!! :P Looks like it was an operator error. :?

Thank you for the quick response and the help Tracker.

Pete
User avatar
Team Tracker
2.5 Star Member
2.5 Star Member
Posts: 104
Joined: Thu Nov 18, 2010 7:36 pm

Re: cut and command unresponsive

Post by Team Tracker »

Hey Pete, glad to see your problem resolved so quickly. He always seems to beat me to the solution.

Regards
Reid T
Tracker CNC
1-800-590-7804
kkustomz
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sat Mar 21, 2015 12:41 pm

Re: cut and command unresponsive

Post by kkustomz »

Could you share the help that fixed your issue, I very often have the same issue, Corel shows the nodes connected, then when I open it in command and cut, I have all these individual lines.
Post Reply

Return to “General Discussion”