Probe ignore activated at call for probe error

Mach3 and Mach4 questions, tips and topics can be posted here
Post Reply
Dooggins1
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Jul 23, 2017 9:16 pm

Probe ignore activated at call for probe error

Post by Dooggins1 »

Can someone help with this? I keep getting this code in the middle of it cutting out stuff. then i cant get it back going in the correct spot so it screws up the whole piece. I just cut something out and worked fine. Did a different piece and started getting this code.
SS 45
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sun May 28, 2017 1:41 pm

Re: Probe ignore activated at call for probe error

Post by SS 45 »

I had this problem a month or so back. Turns out my problem was the probe had dirt in the track and was hanging in the on position. I took it apart and gave it a good cleaning and it worked fine.
Dooggins1
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Jul 23, 2017 9:16 pm

Re: Probe ignore activated at call for probe error

Post by Dooggins1 »

Cool Thanks!
jawad azhar
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Oct 24, 2018 3:51 am

Re: Probe ignore activated at call for probe error

Post by jawad azhar »

i am using plasma cutter with mech3 software
issue that i am facing is probe ignore status
kindly guide me
Post Reply

Return to “Mach3 & Mach4 CNC”