losing arc on touch off
-
wilkies
- 2 Star Member
- Posts: 73
- Joined: Thu Mar 05, 2015 2:43 pm
losing arc on touch off
need help im loosing arc at start because of delay at start of cut on thin metal,i have no delay in sheetcam tools set,but there is a delay after torch fires and loose ark most of the time.any one know the problem.
-
wilkies
- 2 Star Member
- Posts: 73
- Joined: Thu Mar 05, 2015 2:43 pm
Re: losing arc on touch off
found it the spindle was set to 1.
