It is currently Fri Dec 15, 2017 7:16 am

 

Design Edge Video Series

Post your questions or tips on Plasmacam software in this topic.
User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 297
Joined: Sun Mar 11, 2012 4:40 pm

Design Edge Video Series

Postby rdj357 » Sat Nov 18, 2017 8:14 pm

I'm working on a video series walking through the Design Edge software. I'm no videographer nor am I perfect but here's an attempt to start with the basics and walk through the software step by step, feature by feature to help anyone on their journey. Hopefully it will be in an order from basic to advanced that allows viewers to follow along and build on past videos (or experience) and pick up new things as they go.

It's fun for me to do so hopefully it helps someone! I will post new videos to this thread as I go.

https://youtu.be/uYQ5z9z2jhE
Robert Johnson
FourNinety Creations
-------------------------
PlasmaCam 5x10
Snap-n-Cut Mount
PM 65 w/ Mini Machine Torch
Router Attachment/DW611
VCarvePro & Photo VCarve
SpectraCoat Powder Coat System
7'x7'x10' DIY Powder Coat Oven

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1311
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Design Edge Video Series

Postby little blue choo » Sun Nov 19, 2017 11:27 pm

Sounds good Robert. I will be watching

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

krymis
Posts: 45
Joined: Tue Aug 22, 2017 9:59 am

Re: Design Edge Video Series

Postby krymis » Mon Nov 20, 2017 12:47 pm

Robert,
As a mentor to me you do a great job of teaching. Keep up the good work.

User avatar
SeanP
Elite Contributing Member
Elite Contributing Member
Posts: 725
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Design Edge Video Series

Postby SeanP » Mon Nov 20, 2017 2:56 pm

Very well done, that will be great help for people I'm
sure.
Powermax 45XP
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 297
Joined: Sun Mar 11, 2012 4:40 pm

Re: Design Edge Video Series

Postby rdj357 » Thu Dec 07, 2017 4:38 pm

This week's video is pretty basic - just an intro into the coordinate system. Many of us are already intimately familiar with this but there may be something here that can help! I also cover one of the ways I use reference points when designing.

https://youtu.be/K2zHowWxK0o
Robert Johnson
FourNinety Creations
-------------------------
PlasmaCam 5x10
Snap-n-Cut Mount
PM 65 w/ Mini Machine Torch
Router Attachment/DW611
VCarvePro & Photo VCarve
SpectraCoat Powder Coat System
7'x7'x10' DIY Powder Coat Oven


Return to “Plasmacam Software”

Who is online

Users browsing this forum: No registered users and 1 guest