Design Edge Video Series

Plasmacam software related questions and tips can be posted here
Post Reply
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Design Edge Video Series

Post by rdj357 »

I'm working on a video series walking through the Design Edge software. I'm no videographer nor am I perfect but here's an attempt to start with the basics and walk through the software step by step, feature by feature to help anyone on their journey. Hopefully it will be in an order from basic to advanced that allows viewers to follow along and build on past videos (or experience) and pick up new things as they go.

It's fun for me to do so hopefully it helps someone! I will post new videos to this thread as I go.

https://youtu.be/uYQ5z9z2jhE
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Design Edge Video Series

Post by little blue choo »

Sounds good Robert. I will be watching

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
krymis
2 Star Member
2 Star Member
Posts: 63
Joined: Tue Aug 22, 2017 9:59 am

Re: Design Edge Video Series

Post by krymis »

Robert,
As a mentor to me you do a great job of teaching. Keep up the good work.
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Design Edge Video Series

Post by SeanP »

Very well done, that will be great help for people I'm
sure.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1148
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Design Edge Video Series

Post by rdj357 »

This week's video is pretty basic - just an intro into the coordinate system. Many of us are already intimately familiar with this but there may be something here that can help! I also cover one of the ways I use reference points when designing.

https://youtu.be/K2zHowWxK0o
Post Reply

Return to “Plasmacam - DesignEdge”