Design edge not following cutpath

Plasmacam software related questions and tips can be posted here
Post Reply
i_r_machinist
2.5 Star Member
2.5 Star Member
Posts: 131
Joined: Mon Oct 18, 2010 3:22 pm

Design edge not following cutpath

Post by i_r_machinist »

I have a new trainee and I think he changed a parameter or something because my cutter does not follow the path now.
any ideas?
thanks
i_r_
DE problems.jpg
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Design edge not following cutpath

Post by Gamelord »

Probably added one single dot outside the part and the cutter is going to that dot and then coming back.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
User avatar
see&see
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 218
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada
Contact:

Re: Design edge not following cutpath

Post by see&see »

Yep, a hard to see almost invisible line remanent with maybe an oversize kerf setting causing the cut path to wander where it thinks it needs to be.

If you want to upload that pcm file myself or someone else here could take a look at it....
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO. :x
i_r_machinist
2.5 Star Member
2.5 Star Member
Posts: 131
Joined: Mon Oct 18, 2010 3:22 pm

Re: Design edge not following cutpath

Post by i_r_machinist »

Yup, Kerf settings! All better now.
thanks
i_r_
Post Reply

Return to “Plasmacam - DesignEdge”