I have a new trainee and I think he changed a parameter or something because my cutter does not follow the path now.
any ideas?
thanks
i_r_
It is currently Thu Jul 19, 2018 3:32 am
Design edge not following cutpath
-
i_r_machinist
- Posts: 119
- Joined: Mon Oct 18, 2010 3:22 pm
Design edge not following cutpath
You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here
-
Gamelord
- Elite Contributing Member
- Posts: 1617
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Design edge not following cutpath
Probably added one single dot outside the part and the cutter is going to that dot and then coming back.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
see&see
- Elite Contributing Member
- Posts: 180
- Joined: Tue Jun 24, 2014 12:04 pm
- Location: Minden, Nevada
Re: Design edge not following cutpath
Yep, a hard to see almost invisible line remanent with maybe an oversize kerf setting causing the cut path to wander where it thinks it needs to be.
If you want to upload that pcm file myself or someone else here could take a look at it....
If you want to upload that pcm file myself or someone else here could take a look at it....
PlasmaCam DHC2 4 x 4 & Sampson 510 Snap 'n Cut w/Safety Switch Interface Hypertherm 85 & 45XP
-
i_r_machinist
- Posts: 119
- Joined: Mon Oct 18, 2010 3:22 pm
Re: Design edge not following cutpath
Yup, Kerf settings! All better now.
thanks
i_r_
thanks
i_r_
Return to “Plasmacam Software”
Who is online
Users browsing this forum: No registered users and 1 guest
