file conversion

Plasmacam software related questions and tips can be posted here
Post Reply
Karl
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Oct 07, 2015 9:49 pm

file conversion

Post by Karl »

Hi,
Was looking for advice on a file conversion program for PCM to DXF . can anyone recommend one ?
Shane Warnick
3.5 Star Member
3.5 Star Member
Posts: 563
Joined: Fri Jan 24, 2014 11:03 pm

Re: file conversion

Post by Shane Warnick »

So far as I know, .pcm files are plasmacam files, and are proprietary. I think (I could be wrong) that you can only convert them using Design Edge. I use Design Edge, and have the advanced features, so I can export as .dxf . I can do a few for you, but if you have hundreds, well, there is a price for that as there is for most things.

I don't mind helping you out once in a while, if you need.

Shane
Ironman
2 Star Member
2 Star Member
Posts: 82
Joined: Fri Jul 24, 2009 12:01 am
Location: Warburg, Alberta

Re: file conversion

Post by Ironman »

Or if you are using 3.1 version, Go to file/export/DXF
Post Reply

Return to “Plasmacam - DesignEdge”