Slight issues with Torchmate Software v.9.1
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Jan 12, 2018 11:27 am
Slight issues with Torchmate Software v.9.1
So I am a Junior in highschool attempting to cut out 3 individual designs out of 16" steel. I've vectorized the images, created the tool paths, and sequenced. However the issue I am running into is that I do not know what to do next (Neither does my teacher since he hasn't used the software). If someone could give me the steps to properly get a design set up in Torchmate CAD and how to convert it from an EDU file to a GM (Or DXF....Can't remember which comes first) that would be much appreciated!
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
Re: Slight issues with Torchmate Software v.9.1
post the file and i will try to help
-
- 1 Star Member
- Posts: 22
- Joined: Wed Feb 14, 2018 3:31 pm
Re: Slight issues with Torchmate Software v.9.1
u have the torchmate cad program with the white box? then u need the torchmate program with the black box that links the machine to the signal generator and import what you have programmed into that torchmate program.