I'm new to this forum, new to CNC and new to plasma cutting in fact. I've got a Sidekick 8 from ShopSabre and am running a job. everything stopped in the middle of a job and I'm trying to restart at the line where it quit.
I keep getting the message Error - G28 required for XYZ This is followed by Aborted - EMERGENCY STOP when I try to override, return to Home, etc.
If anyone has any thoughts, that would be great. Thanks!!
Help With ShopSabre Controller
-
- 1/2 Star Member
- Posts: 5
- Joined: Tue Mar 06, 2018 6:20 pm
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Mar 03, 2017 9:01 pm
- Location: Unity, Wisconsin
Re: Help With ShopSabre Controller
I had this problem as well, sorry but i don't remember what the fix is but is it is a simple one. Call Ben or Logan at shopsabre they will get you going
ShopSabre Sidekick 10
Enroute 6 Software
Hypertherm PM 85
4th Axis Pipe Cutter
Sidekick Router Package
Eplilog Mini Laser Engraver
Coral Draw 8
Hobart 210 Welder
Columbia Coatings Oven
Enroute 6 Software
Hypertherm PM 85
4th Axis Pipe Cutter
Sidekick Router Package
Eplilog Mini Laser Engraver
Coral Draw 8
Hobart 210 Welder
Columbia Coatings Oven
-
- 1.5 Star Member
- Posts: 33
- Joined: Wed Nov 29, 2017 10:48 pm
- Location: Colorado
Re: Help With ShopSabre Controller
Ben and Logan are great to work with! I am sure you have already but double check to make sure the E stop on the table is not pressed. Rotate it to get it to pop back out if it has been pressed. I believe that is the error message that pops up when you try to run the machine after you press the E stop.
I don't have all the answers but I do have a lot of opinions....
ShopSabre Sidekick 8 with water table
Hypertherm Powermax 85 w/machine and hand torches
IR 5hp 60 gal,+ 60 gallons of storage and aftercooler
Lincoln Square Wave 200
14x40 lathe
ShopSabre Sidekick 8 with water table
Hypertherm Powermax 85 w/machine and hand torches
IR 5hp 60 gal,+ 60 gallons of storage and aftercooler
Lincoln Square Wave 200
14x40 lathe
-
- 1.5 Star Member
- Posts: 46
- Joined: Mon Feb 12, 2018 9:13 am
Re: Help With ShopSabre Controller
You've had better service than me.