Arbor image cutting shop

General software related questions should be posted here.
Post Reply
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Arbor image cutting shop

Post by cstroke »

Hey All,
Weird one here that I'm having.
http://plasmaspider.com/viewtopic.php?f ... rk#p141179
When I open this file I can see it in autocad but when I open it in cutting shop there is nothing there.
I've seen this happen a few other times but very rarely.
Any advice on this one?

Thanks
Chris
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Arbor image cutting shop

Post by tnbndr »

When you do "save as" select the oldest possible autocad dxf format available and try that.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: Arbor image cutting shop

Post by cstroke »

Yes save it as a 2000 autocad dxf. save in draftsight, took it to work and ran it through the water jet program and saved the dxf and nothing.
weird one I see every once in a while.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
Post Reply

Return to “General Discussion”