Corel Draw cutting arc in straight cuts

Corel Draw Graphics Suite related questions and tips can be posted here
Post Reply
joeshown
1 Star Member
1 Star Member
Posts: 11
Joined: Fri Sep 18, 2009 1:29 pm

Corel Draw cutting arc in straight cuts

Post by joeshown »

I have a Tracker 4X8 with the upgraded computer with Corel Draw X3 software. When I draw anything that has an arc such as letters like "G" and "O" it shows up in Command and Cut as a series of short straight lines to form the arc. Any ideas on what needs to be changed in the Corel or Command an Cut software?

Joe Shown
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1901
Joined: Fri Apr 17, 2009 11:48 am

Re: Corel Draw cutting arc in straight cuts

Post by weldguy »

When you export your plt file be sure the curve resolution is set to .001" See attached image showing the window that will appear when you are exporting. This should do it.
curve.PNG
curve.PNG (16.41 KiB) Viewed 698 times
joeshown
1 Star Member
1 Star Member
Posts: 11
Joined: Fri Sep 18, 2009 1:29 pm

Re: Corel Draw cutting arc in straight cuts

Post by joeshown »

Thanks you very much for taking the time to reply to my question. Your answer was very helpful and resolved the problem

Joe Shown
Post Reply

Return to “Corel Draw Graphics Suite”