corel draw help

Corel Draw Graphics Suite related questions and tips can be posted here
Post Reply
Greg7806
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Aug 30, 2015 6:27 pm
Location: Ontario, Canada

corel draw help

Post by Greg7806 »

hey guys drew this last night looked really good to the eye.Went to cut it and when it came around to the left side of the numbers the cnc jmissed its cut almost by an inch.Can anyone tell me why.
Attachments
snow gauge finish1.cdr
(62.96 KiB) Downloaded 91 times
rashidmaal
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon Jan 28, 2013 7:14 am

Re: corel draw help

Post by rashidmaal »

Drawing is too close to edge.you must allow at least 2.5mm for torch
User avatar
Team Tracker
2.5 Star Member
2.5 Star Member
Posts: 104
Joined: Thu Nov 18, 2010 7:36 pm

Re: corel draw help

Post by Team Tracker »

The left side of your gauge has over extending lines which could be causing you problems also. See image below where I have circled, there may be more so you will have to zoom in close to find these. Fix this issue up and try again.
Capture.PNG
Capture.PNG (5.39 KiB) Viewed 1973 times
1-800-590-7804
Post Reply

Return to “Corel Draw Graphics Suite”