Machine settings

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
ageeironworks
1 Star Member
1 Star Member
Posts: 12
Joined: Wed Jan 14, 2009 5:31 pm
Location: Oregon
Contact:

Machine settings

Post by ageeironworks »

We are trying to cut 24 gauge steel, we need to know what to set the machine at. (amps, air, speed, volts, etc.) The smallest tip we can use is 30 amp, for our torch. Please help we don't want to loose a job, but it just isn't working.... :x
mack5894
1 Star Member
1 Star Member
Posts: 15
Joined: Mon Jul 20, 2009 4:34 pm

Re: Machine settings

Post by mack5894 »

Give this a try:
40 amp fine cut tip
arc current: 30 amps
arc voltage (set point) : 80
ipm: 150
Post Reply

Return to “Plasma Cut Quality Forum”