Cutting 14ga anodized brushed aluminum questions

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
User avatar
Nacs Fab
3 Star Member
3 Star Member
Posts: 329
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Cutting 14ga anodized brushed aluminum questions

Post by Nacs Fab »

Have any of you cut brushed aluminum with clear anodizing on the top face - looking to see how plasma cuts with this media. Can you post pics if you have them? Thanks!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2565
Joined: Thu Jul 24, 2008 11:15 am

Re: Cutting 14ga anodized brushed aluminum questions

Post by plasmanewbie »

Should turn out great, get your speed and height right and should be slag free too. I have cut anodized aluminum of various colors before and the only issue I saw was discoloration of the color along the cut edge but you may not even see that with a clear anodize finish.
Post Reply

Return to “Plasma Cut Quality Forum”