help on holes

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

help on holes

Post by gamble »

I think the anti back lash nuts are in need of being replaced. How can I tell for certain if it's the ones on the X or Y the axis that need to be replaced? Rathe not replace ones that don't need to be replaced for now.
Attachments
holes.jpg
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: help on holes

Post by weldguy »

Use your calipers to measure which direction the circle is out of round on and that will be the axis that needs the work I assume. From the picture it looks like left to right is narrower than bottom to top. Good luck.
Post Reply

Return to “Plasma Cut Quality Forum”