It is currently Mon Dec 11, 2017 6:20 am


Hypertherm PowerMax 45XP optimal settings

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Posts: 1
Joined: Tue Oct 31, 2017 4:58 pm

Hypertherm PowerMax 45XP optimal settings

Postby BSMW » Tue Oct 31, 2017 5:13 pm

I own a plasma table and I'm rather new to plasma cutting, I was looking for some information on amp / ipm setting for clean cuts, recommendations on consumables etc. for the 45XP. I apologize if this comes off pretty vague, but it's a starting point for some better questions for me.

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 165
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada

Re: Hypertherm PowerMax 45XP optimal settings

Postby see&see » Tue Oct 31, 2017 10:29 pm

Everything you need is in the Hypertherm manual. (link Below) Speeds, metal thickness and consumable requirements.. There are no real secrets for clean cuts, digital height control is a huge plus tho... ... rmax45-xp/
PlasmaCam DHC2 4 x 4 & Sampson 510 Snap 'n Cut w/Safety Switch Interface Hypertherm 85 & 45XP

Return to “Plasma Cut Quality Forum”

Who is online

Users browsing this forum: No registered users and 1 guest