It is currently Sat Nov 18, 2017 11:59 pm

 

Help finding oem consumables

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Dooggins1
Posts: 6
Joined: Sun Jul 23, 2017 9:16 pm

Help finding oem consumables

Postby Dooggins1 » Sun Oct 08, 2017 6:13 pm

Whats up! I have an everlast 60s plasma and looking for oem type consumables for fine cut type stuff. i have searched the net and everlast website to no previail. Any help would be appreciated.

tcaudle
Posts: 788
Joined: Tue Feb 28, 2012 6:47 pm

Re: Help finding oem consumables

Postby tcaudle » Mon Oct 09, 2017 6:17 pm

Tecmo makes the torch and consumables .
http://www.tecmo.it/upld/repository/File/02.PT+TH.pdf

There are no "fine cut " consumables for that torch .

Good luck on finding the actual parts listed somewhere for you to buy.

Dooggins1
Posts: 6
Joined: Sun Jul 23, 2017 9:16 pm

Re: Help finding oem consumables

Postby Dooggins1 » Mon Oct 09, 2017 8:58 pm

what i meant was a 10-20 amp tip. Im cutting thin stuff and would like a smaller arc (terminology)

tcaudle
Posts: 788
Joined: Tue Feb 28, 2012 6:47 pm

Re: Help finding oem consumables

Postby tcaudle » Tue Oct 10, 2017 1:38 pm

Then you are SOL. They don't make fine cut or low current tips for that torch .
Since that OEM manufacturer of your torch is one of the largest after market consumables providers too, you can rest assured that no one else would make it
I don't know the feasibility to mount one of the smaller torches on the 60s.

Brand X
Posts: 445
Joined: Wed Apr 23, 2014 2:48 pm

Re: Help finding oem consumables

Postby Brand X » Tue Oct 10, 2017 5:50 pm

Looks like they make the tip you want for your PT-60 torch
Tip, Contact Cutting, ø 0.65, 10-20A, Back Striking 51318.06

tcaudle
Posts: 788
Joined: Tue Feb 28, 2012 6:47 pm

Re: Help finding oem consumables

Postby tcaudle » Tue Oct 10, 2017 8:03 pm

contact cutting ? what does that mean? It appears its designed as a drag tip. dunno what the "flat tip" version is.

Brand X
Posts: 445
Joined: Wed Apr 23, 2014 2:48 pm

Re: Help finding oem consumables

Postby Brand X » Tue Oct 10, 2017 11:17 pm

If you look at the machine torch, it shows the same setup. Don't think drag only tip Just need to find one and give it a go.. One thing is a tip might not be perfect for standoff cutting, but sure beats changing a torch out.. Nothing to loose, and everything to gain..


Return to “Plasma Cut Quality Forum”

Who is online

Users browsing this forum: Rich Inman and 5 guests