It is currently Thu Sep 21, 2017 6:33 am

 

Funky sparks

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
iron2
Posts: 51
Joined: Fri Oct 31, 2014 2:04 pm
Contact:

Funky sparks

Postby iron2 » Tue Sep 12, 2017 4:26 pm

I have looked into this a bit and replaced the o ring in the nozzle. The end cap venting holes were half shut and i reamed so all are open now but still getting issue. Bought a new cap but was wrong size. T45 cnc. Need new shield?
Homebuilt 2x4 water table
Torchmatecad
Flashcut THC
Hypotherm 45

iron2
Posts: 51
Joined: Fri Oct 31, 2014 2:04 pm
Contact:

Re: Funky sparks

Postby iron2 » Tue Sep 12, 2017 4:50 pm

iron2 wrote:I have looked into this a bit and replaced the o ring in the nozzle. The end cap venting holes were half shut and i reamed so all are open now but still getting issue. Bought a new cap but was wrong size. T45 cnc. Need new shield?
sorry had video didn't send.
Homebuilt 2x4 water table
Torchmatecad
Flashcut THC
Hypotherm 45


Return to “Plasma Cut Quality Forum”

Who is online

Users browsing this forum: No registered users and 5 guests