Help With Fine Cut Slow Speed 16 gauge??

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
islander261
2.5 Star Member
2.5 Star Member
Posts: 162
Joined: Sun Jan 12, 2014 2:30 pm

Re: Help With Fine Cut Slow Speed 16 gauge??

Post by islander261 »

+1 on using .075" cut height and 200 ipm speed for 14ga HR. I find that failure to cut all the way through is always caused by the torch being too close for whatever reason.

John
Post Reply

Return to “Plasma Cut Quality Forum”