It is currently Sun Jun 17, 2018 8:14 pm

 

Air dryer

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Davehunterconrad
Posts: 5
Joined: Sun Jan 21, 2018 3:37 pm

Air dryer

Postby Davehunterconrad » Tue Apr 10, 2018 10:58 pm

Has anyone used that standard Pneumatic air dryer from harbor freight? $400 bucks but looks legit. So tired of moisture in my lines

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1397
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Air dryer

Postby tnbndr » Wed Apr 11, 2018 10:35 am

If you search on here there was some discussion on them. Some guys had luck with them others not so much. I purchased the one from the store on this site and never looked back. Works great, no issues and dry air. Couple hundred bucks more though.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

plasmanewbie
Posts: 307
Joined: Thu Jul 24, 2008 11:15 am

Re: Air dryer

Postby plasmanewbie » Thu Apr 12, 2018 10:14 am

tnbndr wrote:If you search on here there was some discussion on them. Some guys had luck with them others not so much. I purchased the one from the store on this site and never looked back. Works great, no issues and dry air. Couple hundred bucks more though.


Same here. Bought the Sharpe 6760 from http://plasmaspider.com/shop/dryer_sharpe6760.html and its been flawless.

plasmartist
Posts: 69
Joined: Mon Aug 07, 2017 1:31 pm

Re: Air dryer

Postby plasmartist » Fri Apr 13, 2018 11:51 pm

I bought the 3 stage sharpe as well and like it. No matter what brand you get, its important to mount your dryer as close to your cutter as possible to allow the air more time to cool and condense. Dryers mounted directly off the compressor do practically nothing.

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1437
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Air dryer

Postby little blue choo » Sun Apr 15, 2018 3:13 pm

I have been using the HF unit for 3 years and I've been very happy with it.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Ryan
Posts: 20
Joined: Fri Apr 07, 2017 10:17 am

Re: Air dryer

Postby Ryan » Fri May 18, 2018 8:27 pm

I got an ATD 5 stage 1 gallon desiccant system. It is similar to the Sharpe. Got it on Amazon. I live in very humid Easy KY. Been running the dryer for over 6 months and the desiccant is still good.

Euclid933
Posts: 42
Joined: Fri Oct 06, 2017 2:18 am
Location: N. Lincs, UK
Contact:

Re: Air dryer

Postby Euclid933 » Sat May 19, 2018 3:44 am

I installed a fridge dryer early this year. Good investment, was about £550, but well worth it.
Regards,
Will.

gamble
Elite Contributing Member
Elite Contributing Member
Posts: 926
Joined: Thu Jan 02, 2014 6:33 pm

Re: Air dryer

Postby gamble » Sun May 20, 2018 7:41 pm

I have it
I spent about $85 in fittings and they no longer let you use the 20% off coupon. Also it does NOT come with a plug and the cord is short. The packing sucks so expect some shipping damage. However it’s is cheap and it works very well. I love it. Well worth the money
Some guys have been using them for 10+ years. Mine is only about a year old and worth every penny
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor


Return to “Plasma Cut Quality Forum”

Who is online

Users browsing this forum: No registered users and 2 guests

Easyscriber engrave attachment for Hypertherm torch's