Greenish Blue Arc - I'm not sure whats going on...

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
rkgraphics
1 Star Member
1 Star Member
Posts: 22
Joined: Thu Nov 18, 2010 4:12 pm

Greenish Blue Arc - I'm not sure whats going on...

Post by rkgraphics »

What would cause the arc to turn a greenish blue? It stopped cutting regularly and started sparking and then it turned a greenish blue...? Any suggestions?
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 679
Joined: Thu Jul 30, 2009 8:19 pm

Re: I'm not sure whats going on...

Post by plasmajoe »

Sounds to me that your consumables are burnt up, if you put in new consumables check your gas pressures are set to the amperage you are cutting, and if they are check your gas lines, voltage. The greenish blue hue generally means you blew your electrode and tip.

Plasma Joe
rkgraphics
1 Star Member
1 Star Member
Posts: 22
Joined: Thu Nov 18, 2010 4:12 pm

Re: I'm not sure whats going on...

Post by rkgraphics »

i guess as i was typing that, I kind of answered my own question... I had the consumables in my hand and was ready to clean them when i noticed the electrode :roll: ... Thanks though :) Maybe you can help me with another problem I've been having... Lately it doesn't want to seem to cut very fast if at all... I've tried fiddling with the height, speed, amps, everything... and yet it still seems to not want to cut certain parts...
User avatar
BrianMick
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1003
Joined: Sun Dec 06, 2009 8:00 am
Location: St. Cloud,Minnesota United States of America
Contact:

Re: I'm not sure whats going on...

Post by BrianMick »

What machine are you running? more info the better these guys and gals have will help answer the question......
Brian
rkgraphics
1 Star Member
1 Star Member
Posts: 22
Joined: Thu Nov 18, 2010 4:12 pm

Re: I'm not sure whats going on...

Post by rkgraphics »

Sorry, currently I have a Hypertherm Powermax30 connected to my Plasmacam.
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: I'm not sure whats going on...

Post by jimcolt »

How long have you been running the cosumables? (Electrode, Nozzle)? Green is copper burning.....when the consumables are in good shape the arc burns dead center on the hafnuim (silver colored insert) emitter on te electrode...once the hafnium is used up the arc has no place to go but to the copper part of the electrode....green flames!

Jim Hypertherm
User avatar
geo4932
2 Star Member
2 Star Member
Posts: 96
Joined: Mon Jan 25, 2010 9:22 am

Re: I'm not sure whats going on...

Post by geo4932 »

I have a Hypertherm 30 on my Plasmacam.
Last time that happened to me it was water in the air supply that blew off 1/8" of the electrode. Pretty green flame.

george
User avatar
AnotherDano
4 Star Member
4 Star Member
Posts: 806
Joined: Fri Dec 18, 2009 11:52 pm
Location: Laramie, Wyoming
Contact:

Re: I'm not sure whats going on...

Post by AnotherDano »

I got 'green flamed' yesterday. Changed electrode and tip - plum worn out.
When they go, they go fast.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: I'm not sure whats going on...

Post by jimcolt »

That is why I asked how long he had been using the consumables in the Powermax30. I have talked to quite a few users that have not changed their nozzles or electrodes in that unit for a year! I have one that I use for hand cutting....and it is still on the original electrode after almost 3 years...I have changed the nozzle a few times. Eventually they just plain wear out (hence the word "consumables"!), and the first symptoms are : slower cut speeds, worse edge quality, then the last symptoms are: green flame out the front of the torch!

Jim
User avatar
Loyd
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 688
Joined: Tue Nov 03, 2009 12:28 am
Location: Bald Knob, AR
Contact:

Re: Greenish Blue Arc - I'm not sure whats going on...

Post by Loyd »

But they're so pretty!! 8-) :roll:
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Post Reply

Return to “CNC Plasma Cutters General Forum”