Generator for Plasma

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Fixer
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon Sep 03, 2018 6:17 pm

Generator for Plasma

Post by Fixer »

What size generator is needed to run a 30 amp plasma cutter
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Generator for Plasma

Post by jimcolt »

If it is a Hypertherm plasma you can either look in the operators manual , or go online to the products pages at http://www.hypertherm.com, there are generator specs in the manual and online. Here is the spec for generator operation out of the Hypertherm Powermax30xp operators manual:
generator specs.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Fixer
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon Sep 03, 2018 6:17 pm

Re: Generator for Plasma

Post by Fixer »

Thank you very much Fixer
Post Reply

Return to “CNC Plasma Cutters General Forum”