It is currently Thu Sep 20, 2018 6:54 am

 

Elite Member Contest - WINNER

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Redneck
Elite Contributing Member
Elite Contributing Member
Posts: 265
Joined: Sat Oct 06, 2012 7:16 pm

Re: Elite Member Contest - Surprise Giveaway

Postby Redneck » Fri Aug 03, 2018 8:45 am

5x10 Torchmate table, now updated with Flashcut controls and a Hypertherm 1250. Thank you PlasmaSpider for all you do for us. This site is invaluable!

User avatar
Nacs Fab
Elite Contributing Member
Elite Contributing Member
Posts: 285
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: Elite Member Contest - Surprise Giveaway

Postby Nacs Fab » Fri Aug 03, 2018 10:43 am

I use a Hypertherm 1250 with Duramax torch converted to Mini Torch on my Home Built 4x8 machine. Thank you so much for the Giveaway!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...

DXF
Elite Contributing Member
Elite Contributing Member
Posts: 1406
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: Elite Member Contest - Surprise Giveaway

Postby DXF » Fri Aug 03, 2018 11:12 am

Hobart Airforce 375 and Plasma Cam 4 x 4.

Dave Hanks

Old Iron
Elite Contributing Member
Elite Contributing Member
Posts: 430
Joined: Wed Nov 26, 2014 5:12 pm

Re: Elite Member Contest - Surprise Giveaway

Postby Old Iron » Fri Aug 03, 2018 1:36 pm

I run a Hypertherm 600
Bought it new in 05 and still running great

jason.jason.p
Elite Contributing Member
Elite Contributing Member
Posts: 141
Joined: Mon Jan 25, 2016 8:35 pm

Re: Elite Member Contest - Surprise Giveaway

Postby jason.jason.p » Fri Aug 03, 2018 4:12 pm

Thanks for all your hard work ADMIN I know this bunch can be hard to handle at times. :lol:

Hypertherm PM 85 w/ machine torch

james.davis
Elite Contributing Member
Elite Contributing Member
Posts: 861
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: Elite Member Contest - Surprise Giveaway

Postby james.davis » Fri Aug 03, 2018 5:53 pm

Hypertherm 45 with machine torch also 2 hypertherm 600s
thanks,
Jim

Jack of all trades
Elite Contributing Member
Elite Contributing Member
Posts: 66
Joined: Wed Sep 21, 2016 11:31 am

Re: Elite Member Contest - Surprise Giveaway

Postby Jack of all trades » Sat Aug 04, 2018 8:57 am

:D

sbest1
Elite Contributing Member
Elite Contributing Member
Posts: 475
Joined: Fri Jan 16, 2009 10:26 pm

Re: Elite Member Contest - Surprise Giveaway

Postby sbest1 » Sat Aug 04, 2018 9:59 am

We have a Hypertherm 65 on a 4x8 table

User avatar
steel 35
Elite Contributing Member
Elite Contributing Member
Posts: 596
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Elite Member Contest - Surprise Giveaway

Postby steel 35 » Sat Aug 04, 2018 12:34 pm

Hyp 65 duramax's
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!

plain ol Bill
Elite Contributing Member
Elite Contributing Member
Posts: 698
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: Elite Member Contest - Surprise Giveaway

Postby plain ol Bill » Sat Aug 04, 2018 6:36 pm

Hypertherm 1250 w/ both torches. Self built table.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude

User avatar
rons
Elite Contributing Member
Elite Contributing Member
Posts: 176
Joined: Thu Jul 23, 2015 2:26 pm
Location: Charlotte, NC

Re: Elite Member Contest - Surprise Giveaway

Postby rons » Sat Aug 04, 2018 7:42 pm

Hypertherm Powermax65
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,

harrymorley
Elite Contributing Member
Elite Contributing Member
Posts: 569
Joined: Thu Nov 21, 2013 5:32 pm

Re: Elite Member Contest - Surprise Giveaway

Postby harrymorley » Sat Aug 04, 2018 8:54 pm

Hypertherm 45 on a plasmacam 4x4 table

sphurley
Elite Contributing Member
Elite Contributing Member
Posts: 434
Joined: Sat Jul 04, 2015 10:43 pm

Re: Elite Member Contest - Surprise Giveaway

Postby sphurley » Sun Aug 05, 2018 8:18 am

Hypertherm 85 on homemade 3x4 table C&CNC electronics
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX

ironhorse
Elite Contributing Member
Elite Contributing Member
Posts: 344
Joined: Tue Jan 05, 2010 7:00 am

Re: Elite Member Contest - Surprise Giveaway

Postby ironhorse » Sun Aug 05, 2018 12:15 pm

Hi all, hope you are all having the best of success out there. I have a Hypertherm Powermax 30 and run it on a 4 x 4 Plasma Cam table. Good luck to you all!

User avatar
SCHIDTHEAD
Elite Contributing Member
Elite Contributing Member
Posts: 279
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Elite Member Contest - Surprise Giveaway

Postby SCHIDTHEAD » Sun Aug 05, 2018 2:42 pm

Hands down one of my favorite sites
Hypertherm 1100
Powermax 45 xp
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776

mrd0477
Posts: 4
Joined: Mon Nov 13, 2017 8:59 am

Re: Elite Member Contest - Surprise Giveaway

Postby mrd0477 » Sun Aug 05, 2018 9:44 pm

Miller Xtreme 625. Got it because it was cnc ready, in short...it is not. They charge $250 for a faceplate and it was just more practical to personally modify it. Im not pleased with its results but itll do for what niche I need it to do. I dont advise it for heavy use.

michmetalman
Elite Contributing Member
Elite Contributing Member
Posts: 566
Joined: Wed Sep 19, 2012 6:43 am

Re: Elite Member Contest - Surprise Giveaway

Postby michmetalman » Mon Aug 06, 2018 7:38 am

Hypertherm 45 on a Torchmate

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 383
Joined: Thu Jul 24, 2008 11:15 am

Re: Elite Member Contest - Surprise Giveaway

Postby plasmanewbie » Mon Aug 06, 2018 10:46 am

Pmax 65 with machine torch. Thanks for the contest and all your efforts!

sawdust1
Elite Contributing Member
Elite Contributing Member
Posts: 146
Joined: Tue Apr 19, 2016 10:29 pm
Location: In the way.

Re: Elite Member Contest - Surprise Giveaway

Postby sawdust1 » Mon Aug 06, 2018 1:41 pm

I have a Miller 375 Cutmate. If it would only quit then I could get a machine with a separate machine torch! A bit more power would be nice on occasion as well. My table is a home made machine that I really like. I had to do a bit of rewiring in the Miller.

David

User avatar
SeanP
Elite Contributing Member
Elite Contributing Member
Posts: 780
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Elite Member Contest - Surprise Giveaway

Postby SeanP » Mon Aug 06, 2018 2:56 pm

Good work on the login problems, I was ok on the computer but had to keep logging in on the phone, been good for a few days now thanks.
I'm using a powermax 45 with the duramax torch.
Powermax 45 with Duramax torch.
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery

Pengwynn
Posts: 9
Joined: Mon Aug 15, 2016 11:45 am

Re: Elite Member Contest - Surprise Giveaway

Postby Pengwynn » Mon Aug 06, 2018 3:00 pm

Thanks!

Hypertherm 65 with Duramax HRT

User avatar
Unvevo
Elite Contributing Member
Elite Contributing Member
Posts: 85
Joined: Wed Jun 29, 2016 4:42 pm

Re: Elite Member Contest - Surprise Giveaway

Postby Unvevo » Mon Aug 06, 2018 5:04 pm

Thanks for all your work keeping this place going! Im running a hypertherm 45xp on a cobbled together 4x4

User avatar
Bor21
Elite Contributing Member
Elite Contributing Member
Posts: 61
Joined: Tue May 30, 2017 7:17 am
Location: Randolph, NY

Re: Elite Member Contest - Surprise Giveaway

Postby Bor21 » Mon Aug 06, 2018 7:47 pm

Powermax 85
Bladerunner CandCnC

DIY table
Powermax 85
Bladerunner CandCnC
SheetCam, Mach3,
Inkscape, Gimp
Lots of home BREW

Black Dog
Posts: 21
Joined: Sat Jun 01, 2013 1:08 am
Location: Tekamah, Nebraska
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby Black Dog » Mon Aug 06, 2018 7:58 pm

Please include me

whiskeymike
Elite Contributing Member
Elite Contributing Member
Posts: 317
Joined: Mon Feb 23, 2015 5:23 pm
Location: Austin, TX

Re: Elite Member Contest - Surprise Giveaway

Postby whiskeymike » Tue Aug 07, 2018 12:10 am

Hyperthermia 65 /w Machine Torch. Star labs table.


Return to “CNC Plasma Cutters General Forum”

Who is online

Users browsing this forum: Google [Bot] and 13 guests

Easyscriber engrave attachment for Hypertherm torch's