It is currently Wed Sep 26, 2018 8:55 am

 

Elite Member Contest - WINNER

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
User avatar
txskinney
Posts: 9
Joined: Thu Oct 28, 2010 11:43 pm
Location: Big Spring, Texas
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby txskinney » Wed Aug 08, 2018 9:53 am

Plasmacam 98-z and a hypertherm 45 powermax

34chev
Elite Contributing Member
Elite Contributing Member
Posts: 237
Joined: Wed May 18, 2011 11:05 am

Re: Elite Member Contest - Surprise Giveaway

Postby 34chev » Wed Aug 08, 2018 10:46 am

Ours is homemade

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1411
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby tnbndr » Wed Aug 08, 2018 3:36 pm

I have a Hypertherm PM45 on an LDR 4x8 table.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

BanksAg
Elite Contributing Member
Elite Contributing Member
Posts: 141
Joined: Fri Nov 18, 2016 5:13 pm

Re: Elite Member Contest - Surprise Giveaway

Postby BanksAg » Thu Aug 09, 2018 5:28 pm

Thank you for operating and maintaining this amazing site.

Hypertherm Powermax 45XP on an Arclight 4' x 4' table.
Tim Eggleston
Banks High School
Banks, OR

Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D

gs123
Elite Contributing Member
Elite Contributing Member
Posts: 146
Joined: Tue Apr 17, 2012 3:48 pm
Location: S/W Louisiana

Re: Elite Member Contest - Surprise Giveaway

Postby gs123 » Mon Aug 13, 2018 1:10 pm

i have a 2*4 torchmate with a powermax 85

After Hours Fabrications
Posts: 7
Joined: Tue Jan 10, 2017 2:29 pm

Re: Elite Member Contest - Surprise Giveaway

Postby After Hours Fabrications » Mon Aug 13, 2018 2:12 pm

Hypertherm 85 on an ArcLight 5'x10' table
AFTER HOURS FABRICATIONS
ARC LIGHT PRO 5'X10' TABLE
HYPERMAX 85 PLASMA CUTTER

User avatar
see&see
Elite Contributing Member
Elite Contributing Member
Posts: 185
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada

Re: Elite Member Contest - Surprise Giveaway

Postby see&see » Mon Aug 13, 2018 3:53 pm

1. Hypertherm 85 and PlasmaCam Sampson 5 x 10 table

2. Hypertherm 45XP and PlasmaCam 4 x 4 table
PlasmaCam DHC2 4 x 4 & Sampson 510 Snap 'n Cut w/Safety Switch Interface Hypertherm 85 & 45XP

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1438
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby little blue choo » Mon Aug 13, 2018 9:55 pm

Hypertherm 65

Thanks for the contest.
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

User avatar
Sampson Jones
Elite Contributing Member
Elite Contributing Member
Posts: 294
Joined: Mon Jul 25, 2011 9:30 pm

Re: Elite Member Contest - Surprise Giveaway

Postby Sampson Jones » Wed Aug 15, 2018 6:45 am

I have a Hypertherm pm 45 with machine torch
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 45
Mach 3
Sheetcam
Corel Draw x 5

grindergary
Elite Contributing Member
Elite Contributing Member
Posts: 614
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby grindergary » Wed Aug 15, 2018 7:58 am

PM 105 and PM85
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel DrawX6, V Carve Pro
Miller CTS 280 Miller Mig

tbone
Posts: 1
Joined: Wed Jul 13, 2016 8:14 am

Re: Elite Member Contest - Surprise Giveaway

Postby tbone » Wed Aug 15, 2018 5:55 pm

Plasmacam dhc2
[email protected]

lklassen331
Elite Contributing Member
Elite Contributing Member
Posts: 201
Joined: Mon Dec 08, 2014 4:33 pm
Location: Gentry, AR
Contact:

Re: Elite Member Contest - Surprise Giveaway

Postby lklassen331 » Fri Aug 17, 2018 11:18 am

Thanks for the chance admin!

Currently using a TD Ultracut 200XT hi-def plasma on a 5x10 Dynatorch table.
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.

Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10

Countrylane
Posts: 179
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: Elite Member Contest - Surprise Giveaway

Postby Countrylane » Sun Aug 19, 2018 4:38 pm

Just noticed this give-away and hope we're not too late for a chance to win!
I have a Hypertherm 1000 and running a Dynatorch table that's 5' x 10'.

User avatar
cguethert
Elite Contributing Member
Elite Contributing Member
Posts: 38
Joined: Thu May 18, 2017 12:47 pm

Re: Elite Member Contest - Surprise Giveaway

Postby cguethert » Sat Aug 25, 2018 7:10 am

Appreciate all the hard work done by admin and members.
Thanks All!

Fastcut cnc
Hypertherm PM65

turtlebhp
Posts: 11
Joined: Wed Feb 12, 2014 9:57 pm

Re: Elite Member Contest - Surprise Giveaway

Postby turtlebhp » Tue Aug 28, 2018 6:29 pm

Not sure if I am an elite member but just in case. Thanks to all who work so hard to keep this site going. I am truly amazed at the artists and imaginations at work here. I only wish I had half the talent most of y'all do.

plasmacam 4'x4'
Hypertherm 45
design edge
AutoCAD

200 amp Caliburn HD plasma
Thermal Dynamics 8'X20'

User avatar
admin
Site Admin
Posts: 359
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: Elite Member Contest - WINNER

Postby admin » Wed Sep 05, 2018 10:08 am

Today is the day we choose the winner. This contest was a random draw for an EasyScriber scribing tool for a Hypertherm torch :o

The winner of this random draw is our Elite Contributing member.....

jason.jason.p

Image

The EasyScriber has become very popular and I hope you find it to be a useful addition to your plasma table and Hypertherm torch Jason!

Please send me a PM with your shipping address and we will this out to you right away!

Stay tuned for more giveaways, we have more plasma swag to be had from some of our other sponsors :D

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 326
Joined: Thu Nov 19, 2015 10:02 pm

Re: Elite Member Contest - WINNER

Postby djreiswig » Wed Sep 05, 2018 10:19 am

Congratulations.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 518
Joined: Sun Mar 11, 2012 4:40 pm

Re: Elite Member Contest - WINNER

Postby rdj357 » Wed Sep 05, 2018 10:52 am

Awesome prize, congrats!!
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

User avatar
Gamelord
Elite Contributing Member
Elite Contributing Member
Posts: 1625
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Elite Member Contest - WINNER

Postby Gamelord » Thu Sep 06, 2018 12:27 am

Congrats Jason!!! Awesome prize, thank you PS for taking care of all of us.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 492
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Elite Member Contest - WINNER

Postby Scratch » Thu Sep 06, 2018 8:34 am

Congrats to Jason on an awesome prize! Thanks for the chance at a great giveaway!
I think I'm the oldest 10 year old boy on the forum...

Old Iron
Elite Contributing Member
Elite Contributing Member
Posts: 435
Joined: Wed Nov 26, 2014 5:12 pm

Re: Elite Member Contest - WINNER

Postby Old Iron » Thu Sep 06, 2018 9:39 am

Congratulations Jason!*!*!*!*!*!*!*!*!*!*

User avatar
hdfaster
Elite Contributing Member
Elite Contributing Member
Posts: 393
Joined: Thu Jan 07, 2010 11:38 pm

Re: Elite Member Contest - WINNER

Postby hdfaster » Fri Sep 07, 2018 1:22 am

Nice. Congrats Jason.

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3115
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Elite Member Contest - WINNER

Postby acourtjester » Fri Sep 07, 2018 10:41 am

Congrats to Jason, Free stuff always puts a smile on your face :D just another plus from Plasma Spider, you guys need a pat on the back, here is one sent digitally ;) :lol:
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
admin
Site Admin
Posts: 359
Joined: Thu Jul 03, 2008 5:12 pm
Location: Out In The Shop
Contact:

Re: Elite Member Contest - WINNER

Postby admin » Fri Sep 07, 2018 11:14 am

acourtjester wrote:Congrats to Jason, Free stuff always puts a smile on your face :D just another plus from Plasma Spider, you guys need a pat on the back, here is one sent digitally ;) :lol:


:lol: Wow! Never got a digital pat on the back before! Thanks! :lol:

Have a great weekend everyone!

gamble
Elite Contributing Member
Elite Contributing Member
Posts: 938
Joined: Thu Jan 02, 2014 6:33 pm

Re: Elite Member Contest - WINNER

Postby gamble » Fri Sep 07, 2018 5:49 pm

Hypertherm powermax45
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor


Return to “CNC Plasma Cutters General Forum”

Who is online

Users browsing this forum: No registered users and 10 guests

Easyscriber engrave attachment for Hypertherm torch's